[App_rpt-users] Another remote base question

[Scott Zimmerman]

It is possible that the maxtrac is programmed to not transmit when the channel is in use. (This is 
an option in the RSS) I *think* it is in the "radio wide" menu(s).

Scott

Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531

On 4/20/2012 12:13 PM, Corey Dean wrote:
> I have been working on a single channel remote base as well recently.  I am just using a maxtrac that is on a vhf repeater channel as a user.  I may have my configuration wrong because one of the problems I am having is the remote base will not go into transmit until the receive signal on the link radio drops.  I have always understood a remote base to transmit when needed even it was receiving something.  I guess what I am trying to say is I shouldn't need to wait for the link radio's receiver to drop before I start transmitting on another node.
>
> Another thing I notice is, it will transmit the connection announcement out the link radio when I connected to it from another node.  I don't think it should be doing this...
>
> Can someone give me a hint as to what I can look at to see if I have something wrong.  I would put my configuration in this email but I don't have access to it right now.  I have wanted to send this email for about a week now and figured I had better ask now before I forget again.
>
> Corey N3FE
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>