[App_rpt-users] Another remote base question

[Corey Dean]

Already checked that Scott...  Wish that as all it was.... That would be easy to fix.

Corey Dean


On Apr 20, 2012, at 12:19 PM, "Scott Zimmerman" <n3xcc at repeater-builder.com> wrote:

> It is possible that the maxtrac is programmed to not transmit when the channel is in use. (This is 
> an option in the RSS) I *think* it is in the "radio wide" menu(s).
> 
> Scott
> 
> Scott Zimmerman
> Amateur Radio Call N3XCC
> 474 Barnett Road
> Boswell, PA 15531
> 
> On 4/20/2012 12:13 PM, Corey Dean wrote:
>> I have been working on a single channel remote base as well recently.  I am just using a maxtrac that is on a vhf repeater channel as a user.  I may have my configuration wrong because one of the problems I am having is the remote base will not go into transmit until the receive signal on the link radio drops.  I have always understood a remote base to transmit when needed even it was receiving something.  I guess what I am trying to say is I shouldn't need to wait for the link radio's receiver to drop before I start transmitting on another node.
>> 
>> Another thing I notice is, it will transmit the connection announcement out the link radio when I connected to it from another node.  I don't think it should be doing this...
>> 
>> Can someone give me a hint as to what I can look at to see if I have something wrong.  I would put my configuration in this email but I don't have access to it right now.  I have wanted to send this email for about a week now and figured I had better ask now before I forget again.
>> 
>> Corey N3FE
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> --
> This message was scanned and is believed to be clean.
> Click here to report this message as spam. 
> http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=1C6622103.A8D19
> 
>