[App_rpt-users] EchoLink and the CLI

[Ken]

Yeah - version 266 showed the E/L station's name, IP address and callsign on
the CLI - even when a proxy was used.

 

Version 304 shows nothing like that on the CLI.  The announcement is either
the node number, or nothing (just ".connected") depending on which mode you
configure.  Interestingly, when announcing nothing, there are still messages
on the CLI as if a node number announcement was being played .

 

I think eliminating the E/L database update status messages somehow
(unintentionally) screwed up the ID announcement. 

 

 

Ken

KE2N

 

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bob Roszkowski
Sent: Monday, September 03, 2012 5:46 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] EchoLink and the CLI

 

When I first setup EchoLink on my HUB node, I could log into the CLI from
remote and monitor the activity of the node.  I would see that EchoLink
would update its databases about once a minute or so and when ever someone
on EchoLink connects to the node, I would see what the station was.  It
actually listed their Call sign.  If you looked at the status page for
AllStar, it would show all the nodes connected as well as the EchoLink
stations with their call sign.  I know there is an "undocumented feature"
that AllStar does not show the correct EchoLink node number because it could
be going through a proxy or relay, But it showed the correct call sign in
the status and CLI.  I never had success getting the EchoLink  call signs to
properly announce them selves.  I decided to update the SVN to the latest.
After I was done, I noticed no activity in the CLI for EchoLink.  Also, when
an EchoLink station connects, it just says "Connected (hub node #)"  I tried
changing the verbosity of the CLI, but nothing changed for EchoLink.

Im not looking to get the announcement working, although it would be nice,
but I would like to get the information in the CLI working again.

Has anyone else experienced this?  How do I resolve it?




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120903/565b214a/attachment.html>