[App_rpt-users] transmit hangs on reboot

[Tim Sawyer]

What is *71 on your system?
--
Tim
:wq

On Sep 16, 2012, at 1:40 PM, Stephen Liggett <steve10000 at comcast.net> wrote:

> Group,
> 
> I have recently noted that when I reboot that the transmit remains on, and I have to shell in and do a *71 to turn it off. After that, all is OK. I use the DMK URI, fed to the remote base input of our repeater controller.
> 
> In the past, I recall that from a start or reboot that the transmitter would key for a few seconds and then shut off, but not anymore. Without a lot of troubleshooting, is there a way to insert a *71 command somewhere in the startup sequence? I am not exactly sure what I am talking about here as far as this fix is concerned.
> 
> Any ideas?
> 
> steve
> W3YT repeater
> 28325
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users