[App_rpt-users] transmit hangs on reboot

[Chuck Henderson]

What if you do a *70 instead of *71.  This should tell you who or what is
connected to you that is causing the problem.
 On Sep 16, 2012 3:40 PM, "Stephen Liggett" <steve10000 at comcast.net> wrote:

> Group,
>
> I have recently noted that when I reboot that the transmit remains on, and
> I have to shell in and do a *71 to turn it off. After that, all is OK. I
> use the DMK URI, fed to the remote base input of our repeater controller.
>
> In the past, I recall that from a start or reboot that the transmitter
> would key for a few seconds and then shut off, but not anymore. Without a
> lot of troubleshooting, is there a way to insert a *71 command somewhere in
> the startup sequence? I am not exactly sure what I am talking about here as
> far as this fix is concerned.
>
> Any ideas?
>
> steve
> W3YT repeater
> 28325
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120917/420ac758/attachment.html>