[App_rpt-users] TX Tone Drop out Time

[George Csahanin]

Guys, I may be talking way out of school here, and very sleep deprived...but I don't think Beagle has the horsepower for usbradio, tone decode, generation, and all...

Or do I really need more sleep?

GeorgeC
W2DB
2360
  ----- Original Message ----- 
  From: Bryan D. Boyle 
  To: Mike Wolthuis 
  Cc: <app_rpt-users at ohnosec.org> 
  Sent: Monday, September 17, 2012 7:12 PM
  Subject: Re: [App_rpt-users] TX Tone Drop out Time


  only if, in a subdirectory called 'custom' in /etc/asterisk, you created a file called usbradio.conf.  in other words, no, you don't uncomment it if you haven't.

  --
  Bryan
  Sent from my iPhone
  please forgive misspellings...





  On Sep 17, 2012, at 18:56, "Mike Wolthuis" <wolthuis at gmail.com> wrote:


    I tried to put the following two lines into my beagle.conf

    txtoctype=notone

    txctcssdefault=131.8



    Now there is a line in the beagle.conf that says:

    #includeifexists custom/usbradio.conf



    However, as you see it is commented out.



    Should those two lines have an effect out of beagle.conf or do I need to add usbradio.conf and remove the uncomment #?



    Thanks,

    Mike

    Kb8zgl







    From: Ken [mailto:ke2n at cs.com] 
    Sent: Sunday, September 16, 2012 12:15 PM
    To: 'Mike Wolthuis'; app_rpt-users at ohnosec.org
    Subject: RE: [App_rpt-users] TX Tone Drop out Time



    Beagle board uses chan_simpleusb 



    So the config file is:  simpleusb.conf



    Allegedly it supports the same encoding functions. 

    See:

    http://ohnosec.org/pipermail/app_rpt-users/2011-February/002275.html



    Ken







    From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Mike Wolthuis
    Sent: Sunday, September 16, 2012 9:52 AM
    To: app_rpt-users at ohnosec.org
    Subject: Re: [App_rpt-users] TX Tone Drop out Time



    Does this work on a Beagle board also do you know?



    Mike

    Kb8zgl



    From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Ken
    Sent: Sunday, September 16, 2012 7:55 AM
    To: 'Jim W7RY'; app_rpt-users at ohnosec.org
    Subject: Re: [App_rpt-users] TX Tone Drop out Time



    This is in usbradio.conf



    txtoctype=notone     ; Transmit tone control type: no,phase,notone

                         ; no - CTCSS tone encoding with no hang time

                         ; phase - encode CTCSS and reverse phase 

                         ; AKA ("reverse burst") before unkeying TX

                         ; notone - encode CTCSS and stop sending tone before unkeying TX

                         ; AKA ("chicken burst")





    If you select notone (as shown here), then the PL drops about 600 ms before the carrier drops.

    Most people like it that way ;-)



    Ken





    From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim W7RY
    Sent: Sunday, September 16, 2012 12:05 AM
    To: app_rpt-users at ohnosec.org
    Subject: [App_rpt-users] TX Tone Drop out Time



    I had my PL tone encoder (node generated) drop out before the carrier dropped out. It seems to have quit working. The PL generator is working fine, but the timing seems to changed.  I don’t seem to find the command now. I'm probably not be looking in the right file.



    Can someone please tell me where that setting is?



    Thanks!

    73

    Jim W7RY



    _______________________________________________
    App_rpt-users mailing list
    App_rpt-users at ohnosec.org
    http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120917/8cad1d91/attachment.html>