[App_rpt-users] Remote command?

[Jeffrey S. Carrier]

Quick question, I'm playing with MDC1200 control due to all of the
recent posts.  I have that part working but here is my issue.  I have 4
nodes, 3 of them are connected to radios and one of them is a hub node.
The hub node is connected to the internet and is the connection point to
the allstar and echolink network.  The 3 nodes connected to the radios
are on private wireless LAN.  I'd "like" to be able to send a command on
one of the RF nodes via either MDC1200 or DTMF to say disable incoming
connections but that command has to be passed to the "hub" node.  Is
there a way to properly format a macro to accomplish this or am I stuck
with doing *4XXXXX then sending the command?

 

Thanks in advance

 

73 de K0JSC

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120918/8c69b2ba/attachment.html>