[App_rpt-users] Remote command?

[Jeffrey S. Carrier]

Is there a way to mute the MDC1200?  My control codes are working but
the MDC is transmitted over the TX path on all linked repeaters.  Is it
possible to mute this?

 

 

Thanks, 

 

K0JSC

 

 

________________________________

From: Jim Duuuude [mailto:telesistant at hotmail.com] 
Sent: Tuesday, September 18, 2012 10:32 AM
To: Jeffrey S. Carrier; app_rpt mailing list
Subject: RE: [App_rpt-users] Remote command?

 

Well, how about *4XXXX*31999#

(like if you wanted to execute *1999 on the linked node)

Jim

________________________________

Date: Tue, 18 Sep 2012 10:14:18 -0600
From: jeff.carrier at rmsmsecurity.com
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Remote command?

Quick question, I'm playing with MDC1200 control due to all of the
recent posts.  I have that part working but here is my issue.  I have 4
nodes, 3 of them are connected to radios and one of them is a hub node.
The hub node is connected to the internet and is the connection point to
the allstar and echolink network.  The 3 nodes connected to the radios
are on private wireless LAN.  I'd "like" to be able to send a command on
one of the RF nodes via either MDC1200 or DTMF to say disable incoming
connections but that command has to be passed to the "hub" node.  Is
there a way to properly format a macro to accomplish this or am I stuck
with doing *4XXXXX then sending the command?

 

Thanks in advance

 

73 de K0JSC

 

 

 


_______________________________________________ App_rpt-users mailing
list App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120919/72bd4a48/attachment.html>