[App_rpt-users] oh

[Ken]

I guess I misunderstood - if the nodes can talk to each other then, you do need to use the REMOTE COMMAND (that is *4nnnnn on a standard setup) to execute a command on one node, *from* another node. 

Ken




-----Original Message-----
From: Jeffrey S. Carrier <jeff.carrier at rmsmsecurity.com>
To: app_rpt-users <app_rpt-users at ohnosec.org>
Sent: Fri, Sep 21, 2012 2:14 pm
Subject: Re: [App_rpt-users] ok...



Bryan, 
 
The nodes DO have to be connected even if they’re on the same LAN I’ve found that they have to be connected in order to pass commands from one to the other.  I’m assuming yours are public nodes, mine is different because they’re all private  nodes except for 28257.
 

K0JSC


From: Ken [mailto:ke2n at cs.com] 
Sent: Friday, September 21, 2012 12:10 PM
To: bdboyle at bdboyle.com; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] ok...

 

you just have to wait 15-30 minutes after restarting *either* of the systems

 

you can avoid the wait by putting the explicit address (IP:port) in each other node's [nodes] stanza.

 

Asterisk checks the [nodes] list before going to the registration server ... this is just like if you had some internal or non-registering nodes (numbers less than 2000, for example) except you include the port number.

 

Ken



-----Original Message-----
From: Bryan D. Boyle <bdboyle at bdboyle.com>
To: app_rpt mailing list <app_rpt-users at ohnosec.org>
Sent: Fri, Sep 21, 2012 1:19 pm
Subject: [App_rpt-users] ok...

so...got it registered...and can connect between node connected on one
internal server on iax port 4570 to another on iax port 4569...it shows
up in the node list on the mother ship...
 
However...using the cli command 'rpt fun node dtmf-function' between
them...nada.
 
do I have to specify somewhere the proper ports at IP (ie 192.168.1.98:4569
and vice versa) to get commands to pass between the servers?
 
Sorry for what may seem bloody obvious...
 
BB
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



_______________________________________________
pp_rpt-users mailing list
pp_rpt-users at ohnosec.org
ttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120921/21307df0/attachment.html>