[App_rpt-users] RTCM

Jeffrey S. Carrier jeff.carrier at rmsmsecurity.com
Tue Sep 25 05:30:29 UTC 2012


Ok, looks like I have it up and running.  All the audio levels are ok
now and it's transmitting/receiving.  The issue that slaps me right in
the face is my own audio that I hear when I unkey.  If I do a "Test
1,2,3" when I unkey I hear myself saying "2, 3"

 

It's set up in a non voting stand alone mode right now.

 

73 de k0jsc

 

 

________________________________

From: Tim Sawyer [mailto:tim.sawyer at mac.com] 
Sent: Monday, September 24, 2012 6:17 PM
To: Alan Adamson
Cc: 'Jim Duuuude'; Jeffrey S. Carrier; 'app_rpt mailing list'
Subject: Re: [App_rpt-users] RTCM

 

Do you have more than one RTCM? If so did you change the serial
number(s)? The serial number determines the MAC address and therefore
must be unique.

--

Tim

:wq

 

On Sep 24, 2012, at 2:23 PM, Alan Adamson <adamson_alan at hotmail.com>
wrote:





Ok, so I give, how do you update the firmware on one of these?  I have
the same issue from time to time, what solves it is to point the rtcm to
some fictitious IP address for about 3-5 minutes and then back to the
correct address and then all will work just fine.

 

What's odd about when it happens is that the packets are still coming to
the allstar server, and being authenticated, but the rtcm never see them
returned... I'm sure it has to do with the udp packet traversal stuff.

 

Alan

 

From: app_rpt-users-bounces at ohnosec.org
<mailto:app_rpt-users-bounces at ohnosec.org>
[mailto:app_rpt-users-bounces at ohnosec.org
<mailto:users-bounces at ohnosec.org> ] On Behalf Of Jim Duuuude
Sent: Monday, September 24, 2012 4:18 PM
To: jeff.carrier at rmsmsecurity.com <mailto:jeff.carrier at rmsmsecurity.com>
; app_rpt mailing list
Subject: Re: [App_rpt-users] RTCM

 

are you using the latest firmware and app_rpt sources from SVN?

> Date: Mon, 24 Sep 2012 13:41:07 -0600
> From: jeff.carrier at rmsmsecurity.com
<mailto:jeff.carrier at rmsmsecurity.com> 
> To: app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org> 
> Subject: Re: [App_rpt-users] RTCM
> 
> Can anyone provide any guidance on this issue?
> 
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> <System Time Not Set> ERROR! Host response timeout
> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)
> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)
> 
> I've changed the buflen parameter and still no joy. Ping times are no
> more than 150 ms between the server and rtcm.
> 
> Thanks K0JSC
> 
> 
> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org
<mailto:app_rpt-users-bounces at ohnosec.org> 
> [mailto:app_rpt-users-bounces at ohnosec.org]
<mailto:%5bmailto:app_rpt-users-bounces at ohnosec.org%5d>  On Behalf Of
Ramesh Dhami
> (VA3UV)
> Sent: Saturday, September 22, 2012 9:17 PM
> To: app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org> 
> Subject: Re: [App_rpt-users] Configuration of multiple nodes
> 
> On 22/09/2012 10:50 PM, Matthew Pitts wrote:
> > Good evening,
> >
> > I will be using the ACID installation cd to set up my first
permanent
> AllStar Link server and am wondering how to configure the system so
that
> the hub node and its three branch nodes come up connected from the
> beginning. I have been running a single node in a virtual machine off
> and on for about a month now and uave most of the parts ready to do
the
> live system. Feel free to give suggestions; I'm willing to learn the
> best way to do things, even though I've been around Linux almost 18
> years.
> >
> 
> <-- In the node stanza in rpt.conf add the following:
> 
> startup_macro=*5100
> 
> 
> Then edit or create a new [macro] stanza - example:
> 
> [macro]
> 100 = *912329#
> 
> 
> In this example, the node @ start-up will call macross 100; macro 100 
> creates a permanent link to node 2329. Since you want to link to 3 
> branch nodes, you can add multiple nodes in the macro - e.g:
> 
> 100 = *912329*911200*911300#
> 
> 
> HTH.
> 
> Cheers,
> 
> Ramesh.
> www.freestar.us <http://www.freestar.us> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org> 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
<http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org> 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
<http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org> 
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
<http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120924/c57e3772/attachment.html>


More information about the App_rpt-users mailing list