[App_rpt-users] RTCM

Tue Sep 25 06:02:10 UTC 2012

then just shorten the buffer lengths (if you have short enough net lag times to do this validly)

Jim

Subject: RE: [App_rpt-users] RTCM
Date: Mon, 24 Sep 2012 23:30:29 -0600
From: jeff.carrier at rmsmsecurity.com
To: tim.sawyer at mac.com; adamson_alan at hotmail.com
CC: telesistant at hotmail.com; app_rpt-users at ohnosec.org

Ok, looks like I have it up and running. 
All the audio levels are ok now and it’s transmitting/receiving.  The issue
that slaps me right in the face is my own audio that I hear when I unkey.  If I
do a “Test 1,2,3” when I unkey I hear myself saying “2, 3”

It’s set up in a non voting stand alone
mode right now.

73 de k0jsc

From: Tim Sawyer
[mailto:tim.sawyer at mac.com] 

Sent: Monday, September 24, 2012
6:17 PM

To: Alan Adamson

Cc: 'Jim Duuuude'; Jeffrey S. Carrier; 'app_rpt mailing list'

Subject: Re: [App_rpt-users] RTCM

Do you have more than one RTCM? If so did you change the serial
number(s)? The serial number determines the MAC address and therefore must be
unique.

--

Tim

:wq

On Sep 24, 2012, at 2:23 PM, Alan Adamson <adamson_alan at hotmail.com> wrote:

Ok, so I give, how
do you update the firmware on one of these?  I have the same issue from time to
time, what solves it is to point the rtcm to some fictitious IP address for
about 3-5 minutes and then back to the correct address and then all will work
just fine.

What's odd about
when it happens is that the packets are still coming to the allstar server, and
being authenticated, but the rtcm never see them returned… I'm sure it has to
do with the udp packet traversal stuff.

Alan

From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On
Behalf Of Jim Duuuude

Sent: Monday, September 24, 2012 4:18 PM

To: jeff.carrier at rmsmsecurity.com; app_rpt
mailing list

Subject: Re: [App_rpt-users] RTCM

are you using the latest firmware
and app_rpt sources from SVN?

> Date: Mon, 24 Sep 2012 13:41:07 -0600

> From: jeff.carrier at rmsmsecurity.com

> To: app_rpt-users at ohnosec.org

> Subject: Re: [App_rpt-users] RTCM

> 

> Can anyone provide any guidance on this issue?

> 

> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)

> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)

> <System Time Not Set> ERROR! Host response timeout

> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)

> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)

> <System Time Not Set> ERROR! Host response timeout

> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)

> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)

> <System Time Not Set> ERROR! Host response timeout

> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)

> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)

> <System Time Not Set> ERROR! Host response timeout

> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)

> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)

> <System Time Not Set> ERROR! Host response timeout

> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)

> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)

> <System Time Not Set> ERROR! Host response timeout

> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)

> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)

> <System Time Not Set> ERROR! Host response timeout

> <System Time Not Set> Host Connection Lost (Pri) (10.0.0.35)

> <System Time Not Set> Host Connection established (Pri) (10.0.0.35)

> 

> I've changed the buflen parameter and still no joy. Ping
times are no

> more than 150 ms between the server and rtcm.

> 

> Thanks K0JSC

> 

> 

> -----Original Message-----

> From: app_rpt-users-bounces at ohnosec.org

> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Ramesh Dhami

> (VA3UV)

> Sent: Saturday, September 22, 2012 9:17 PM

> To: app_rpt-users at ohnosec.org

> Subject: Re: [App_rpt-users] Configuration of multiple nodes

> 

> On 22/09/2012 10:50 PM, Matthew Pitts wrote:

> > Good evening,

> >

> > I will be using the ACID installation cd to set up my first permanent

> AllStar Link server and am wondering how to configure the system so that

> the hub node and its three branch nodes come up connected from the

> beginning. I have been running a single node in a virtual machine off

> and on for about a month now and uave most of the parts ready to do the

> live system. Feel free to give suggestions; I'm willing to learn the

> best way to do things, even though I've been around Linux almost 18

> years.

> >

> 

> <-- In the node stanza in rpt.conf add the following:

> 

> startup_macro=*5100

> 

> 

> Then edit or create a new [macro] stanza - example:

> 

> [macro]

> 100 = *912329#

> 

> 

> In this example, the node @ start-up will call macross 100; macro 100 

> creates a permanent link to node 2329. Since you want to link to 3 

> branch nodes, you can add multiple nodes in the macro - e.g:

> 

> 100 = *912329*911200*911300#

> 

> 

> HTH.

> 

> Cheers,

> 

> Ramesh.

> www.freestar.us

> 

> _______________________________________________

> App_rpt-users mailing list

> App_rpt-users at ohnosec.org

> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

> _______________________________________________

> App_rpt-users mailing list

> App_rpt-users at ohnosec.org

> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________

App_rpt-users mailing list

App_rpt-users at ohnosec.org

http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120924/1ccac755/attachment.html>