[App_rpt-users] Frequency Agile Remote - XCAT FUBAR

[Tim Sawyer]

Maybe you have something wrong with your remote [functions] stanza. Let's see that that looks like on your system.
--
Tim
:wq

On Aug 1, 2013, at 3:19 PM, Robert A. Poff WB3AWJ <wb3awj at comcast.net> wrote:

> Still digging on my Agile Remote.
> 
> Acid with a Syntor X and XCAT.
> When I try to set a frequency, it's sending the CIV string to retrieve a memory from the radio.
> Not the string needed to set  it from one of the memory entries in rpt.conf.
> 
> Running Asterisk in the foreground with all the debug turned up here's what I see on the console executing a *017 command :
> 
> @@@@ action: remote, param = 1
> @@@@ table index i = 5
> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:17558 function_remote: 28260 param=1 digitbuf=17 source=2
> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:17483 get_mem_set:  digitbuf=17
> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:4225 retrieve_memory: memory=17 block=memory
> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:10476 rpt_telemetry: Tracepoint rpt_telemetry() entered mode=38
> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:10760 rpt_telemetry: Tracepoint rpt_telemetry() exit
> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:17486 get_mem_set:  freq=146.520  res=0
> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:12849 collect_function_digits: rv=3
> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:10476 rpt_telemetry: Tracepoint rpt_telemetry() entered mode=3
> [Aug  1 15:06:09] NOTICE[2718]: app_rpt.c:10760 rpt_telemetry: Tracepoint rpt_telemetry() exit
> Mode
> [Aug  1 15:06:09] NOTICE[2731]: app_rpt.c:13870 serial_remote_io: ioport=/dev/ttyS0 baud=14 iofd=0x19
> String output was �� 
�'Ms:
> FE FE 20 E0 08 01 FD 
> [Aug  1 15:06:09] NOTICE[2732]: app_rpt.c:8420 wait_interval: Delay interval = 2000
> [Aug  1 15:06:10] WARNING[2731]: app_rpt.c:13910 serial_remote_io: -99999 Serial device not responding on node 28260
> Offset Initial/Simplex
> Frequency
> Offset
> CTCSS
> Frequency
> [Aug  1 15:06:10] NOTICE[2731]: app_rpt.c:8420 wait_interval: Delay interval = 2000
> [Aug  1 15:06:11] NOTICE[2732]: app_rpt.c:8424 wait_interval: Delay complete
>     -- Hungup 'Zap/pseudo-1521668112'
> [Aug  1 15:06:12] NOTICE[2731]: app_rpt.c:8424 wait_interval: Delay complete
>     -- <Zap/pseudo-1162233705> Playing 'rpt/invalid-freq' (language 'en')
> 
> At one point I added a statement to printf myrpt->remoterig variable in the check_freq function.
> It returned "myrpt->remoterig=Mode"   ?????
> Shouldn't that be  "xcat", or "remote_rig_xcat" ?
> 
> Any suggestions where I should be looking?
> 
> 
>  
> Robert A. Poff
> Loganville, PA.
> 
> 
> "Lieutenant, target the offending power boat and launch photon torpedoes"
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130801/f58d9fc6/attachment.html>