[App_rpt-users] Re : Re: [Bulk] App_rpt Install for Dummies

[pete M]

Why a service monitor? A deviation meter wont do it?

-----Original Message-----

From: Tim Sawyer
Sent: 20 Feb 2013 03:59:07 GMT
To: app_rpt-users at ohnosec.org list,Benjamin L. Naber
Subject: Re: [App_rpt-users] [Bulk]  App_rpt Install for Dummies

You know, that's so true. It's really important for you (or a friend) to have a service monitor and the knowledge to use it properly. App_rpt makes setting up a node so much easier and accurate than any of the other VoIP technologies, which is one of the reasons app_rpt sounds so good, but you still have to know what your are doing. My "App_rpt Install for Dummies" focused on the computer setup and assumes you're a radio wiz.
--
Tim
:wq

On Feb 19, 2013, at 5:28 PM, Benjamin L. Naber <benjamin at kb9lfz.com> wrote:

> One must not forget to become a friendly ham and ask for training from
> someone or ham club that has one, on how to *properly* use a service
> monitor to tune their allstar node setups.
>
> While there is an alternative way, I really don't recommend it if they
> are going to have a community of users.
>
> ~Benjamin, KB9LFZ

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users