[App_rpt-users] Dual PL Tone? Possible?

[Bob Roszkowski]

This machine has the latest update.  Do you know what version you are
running?  I need to figure out how to check what version I have.
On Nov 6, 2013 12:23 PM, "Jon Rorke" <jrorke at cogeco.ca> wrote:

>  Hmm, mine seems to work as I described. But I seem to remember that i had
> to do an update from the SVN to get it to work right.
> Unless of course something got changed in the newer sw since then.
> Jon VA3RQ
> On 11/6/2013 12:43 PM, Bob Roszkowski wrote:
>
> Hello Jon,
>
> I did try what you mentioned and was able to get the repeater to key up on
> two different PL tones. However, both tones did key up the link. I matched
> all parameters in the usbradio.conf file and restarted.
>
> Any ideas?
>
> boB W5EVH
> On Nov 6, 2013 6:57 AM, "Jon Rorke" <jrorke at cogeco.ca> wrote:
>
>>  Yes App_Rpt does support multi tone. I have done it.
>>
>> If you use the defined default tone then your signal goes out over the
>> repeater and any links connected.
>>
>> If you use one of the alternate tones defined then only the repeater
>> works locally and your signal doesnt not go out on any connected links.
>>
>> [usbNODE#]
>>
>> hdwtype=0
>> rxboost=1
>> txboost=1
>> rxctcssrelax=1
>> txctcssdefault=103.5
>> rxctcssfreqs=103.5,136.5,156.7
>> txctcssfreqs=103.5,136.5,156.7
>> ;rxctcssoverride=0
>> ;carrierfrom=usbinvert
>> carrierfrom=dsp
>> ;ctcssfrom=no
>> ctcssfrom=dsp
>> rxdemod=flat
>> txprelim=yes
>> txlimonly=no
>> txtoctype=phase
>> txmixa=composite
>> txmixb=no
>> invertptt=0
>> duplex=1
>> rxondelay=0
>> rxnoisefiltype=0
>> eeprom=0
>>
>> #includeifexists custom/usbradio.conf
>>
>> From the above example from usbradio.conf you can see that the default
>> tone is 103.5 but it will aslo work on 136.5 and 156.7.
>>
>> But if you use the non default tones it only works in local mode.
>>
>> Jon VA3RQ
>>
>>
>>
>>
>> On 11/5/2013 11:02 PM, Robert A. Poff wrote:
>>
>> While it won't selectively route to network or local only, you can use
>> multiple tones.
>>
>> Operating like a community repeater.
>>
>> In usbradio.conf (urd.conf for XIPAR), on the rxctcssfreqs and
>> txctcssfreqs lines put the additional tones separated by commas.
>>
>> These of course need to be standard PL frequencies.
>>
>> Last year we needed to transition from 123.0 to 146.2. Ran both PLs for
>> two months.
>>
>>
>> --
>> Sent from my Android phone with K-9 Mail.
>> Please excuse my brevity and typing errors.
>>
>> _______________________________________________
>> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131106/68ac943f/attachment.html>