[App_rpt-users] No TX audio upon reboot after initial install. Slow DMK URI LED Blink (Detailed info)
William Schleppegrell
wschleppegrell at gmail.com
Wed Nov 13 23:39:48 UTC 2013
My node consists of an Intel NUC DCCP847DYE PC Which has an Intel Celeron™
Processor 847(1.10 GHz, 2M Cache)
It has 3 USB ports and Video / Audio out are supported by 2 HDMI ports
which may be part of my problem.
•
Intel® HD Graphics
•
Dual HDMI Ports supporting dual independent display
Intel® High Definition Audio (Intel® HD Audio) via two
HDMI 1.4a outputs supporting 8 channel (7.1) digital
audio
I am running a single node on this pc. The node is operating a UHF
repeater. Two radios. Icom Commercial IC-F420 mobiles via a DMK URI.
I loaded ACID and my system ran fine until I rebooted. This is my second
attempt at installation.
I will include my .conf files below. I have PL tones set on radios but
am not using COR/COS. I utilize the software to detect PL to trigger
TX/RX.
I have a slow blinking green LED on the DMK URI 2-3 flashes per second,
when it has failed and is not sending audio to the TX radio(like now). And
a nice fast blink pattern when it is working.
Ok...Oh the is keying up with a staticy transmission during ID's and when
Flash is run in the radio-tune-menu, but not recognizable audio is heard.
RPT.CONF
[29922] ; Change this to your assigned node
number
rxchannel=Radio/usb29922
duplex=2
erxgain=-3
etxgain=3
;controlstates=controlstates
scheduler=schedule29922
morse=morse29922
macro=macro29922
functions=functions29922
phone_functions=functions29922
link_functions=functions29922
telemetry=telemetry
wait_times=wait-times
context = radio
callerid = "Repeater" <0000000000>
idrecording = |iAE5YY
accountcode=RADIO
hangtime=100
althangtime=100
totime=170000
idtime=540000
politeid=3000
idtalkover=|iAE5YY
unlinkedct=ct2
remotect=ct3
linkunkeyct=ct8
;nolocallinkct=0
;eannmode=1
;connpgm=yourconnectprogram
;discpgm=yourdisconnectprogram
;lnkactenable=0
;lnkacttime=1800
;lnkactmacro=*52
;lnkacttimerwarn=30seconds
;remote_inact_timeout=1800
;remote_timeout=3600
nounkeyct=0
;holdofftelem=0
beaconing=0
;
; *** Status Reporting ***
;
; Uncomment the either group following two statpost lines to report the
status of your node to stats.allstarlink.org
; depending on whether you are running ACID or Limey Linux.
; ** For ACID ***
statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
; ** For Limey Linux **
;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
;
; Morse code parameters, these are common to all repeaters.
;
[morse29922]
speed=18
frequency=800
amplitude=4096
idfrequency=750
idamplitude=1024
[schedule29922]
;dtmf_function = m h dom mon dow ; ala cron, star is implied
[functions29922]
1=ilink,1
2=ilink,2
3=ilink,3
4=ilink,4
5=macro,1
70=ilink,5
71=ilink,6
72=ilink,7
73=ilink,15
74=ilink,16
75=ilink,8
80=status,1
81=status,2
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up
0=autopatchdn ; Autopatch down
;989=cop,4
980=status,3
99=cop,6
; Place command macros here
[macro29922]
[telemetry]
ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
ct2=|t(660,880,150,2048)
ct3=|t(440,0,150,4096)
ct4=|t(550,0,150,2048)
ct5=|t(660,0,150,2048)
ct6=|t(880,0,150,2048)
ct7=|t(660,440,150,2048)
ct8=|t(700,1100,150,2048)
remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
remotemon=|t(1209,0,50,2048)
cmdmode=|t(900,903,200,2048)
functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
patchup=rpt/callproceeding
[wait-times]
telemwait=2000
idwait=500
unkeywait=2000
calltermwait=2000
;
; This is where you define your nodes which cam be connected to.
;
[nodes]
; Note, if you are using automatic update for allstar link nodes,
; no allstar link nodes should be defined here. Only place a definition
; for your locak nodes, and private (off of allstar link) nodes here.
29922 = radio at 127.0.0.1/29922,NONE
; Memories for remote bases
[memory]
;00 = 146.580,100.0,m
;01 = 147.030,103.5,m+t
;02 = 147.240,103.5,m+t
;03 = 147.765,79.7,m-t
;04 = 146.460,100.0,m
;05 = 146.550,100.0,m
USBRADIO.CONF
[general]
[usb29922]
hdwtype=0
rxboost=1
txboost=1
rxctcssrelax=1
txctcssdefault=136.5
rxctcssfreqs=136.5
txctcssfreqs=136.5
;rxctcssoverride=0
carrierfrom=dsp
ctcssfrom=dsp
rxdemod=flat
txprelim=no
txlimonly=no
txtoctype=no
txmixa=composite
txmixb=no
invertptt=0
duplex=1
rxondelay=0
rxnoisefiltype=0
eeprom=0
#includeifexists custom/usbradio.conf
IAX.CONF
; Inter-Asterisk eXchange driver definition
;
;
[general]
bindport=4569
bindaddr=0.0.0.0
disallow=all
allow=gsm
allow=g726aal2
allow=ulaw
jitterbuffer=yes
forcejitterbuffer=yes
dropcount=2
maxjitterbuffer=4000
maxjitterinterps=10
resyncthreshold=1000
maxexcessbuffer=80
minexcessbuffer=10
jittershrinkrate=1
tos=0x1E
autokill=yes
delayreject=yes
;iaxthreadcount=30
;iaxmaxthreadcount=150
register=29922:<PASSWORD OMITTED>@register.allstarlink.org
IN EMAIL for SECURITY
[radio-proxy]
type=user
deny=0.0.0.0/0.0.0.0
permit=/255.255.255.255
context=radio-secure-proxy
disallow=all
allow=g726aal2
transfer=no
[radio-proxy-out]
type=peer
host=
username=29922
secret=<OMITTED for SECURITY>
auth=md5
disallow=all
allow=g726aal2
transfer=no
; Incoming radio connections
[radio]
type=user
disallow=all
allow=g726aal2
allow=gsm
codecpriority=host
context=radio-secure
transfer=no
; Incoming phone connections to app_rpt
;[radio-control]
;type=user
;secret=nunya
;disallow=all
;allow=gsm
;codecpriority=host
;context=radio-control
;transfer=no
; Setup for outgoing calls
;[yourprovider] ; This needs to change
;type=peer
;host=127.0.0.1
;secret=nunya
;auth=md5
;disallow=all
;allow=gsm
;transfer=no
[allstar-sys]
type=user
context=allstar-sys
auth=rsa
inkeys=allstar
disallow=all
allow=ulaw
[allstar-public]
type=user
context=allstar-public
auth=md5
secret=allstar
disallow=all
allow=ulaw
allow=gsm
EXTENSIONS.CONF
[general]
static=yes ; These two lines prevent the command-line interface
writeprotect=yes ; from overwriting the config file. Leave them here.
[globals]
HOMENPA=713
[default]
exten => i,1,Hangup
[radio-secure]
exten => 29922,1,rpt,29922
[radio-secure-proxy]
exten => 29922,1,rpt,29922|X
exten => _0X.,1,Goto(allstar-sys|${EXTEN:1}|1)
[pstn-out]
exten=_NXXNXXXXXX,1,playback(ss-noservice)
exten=_NXXNXXXXXX,2,Congestion
[invalidnum]
exten=s,1,Wait,3
exten=s,n,Playback,ss-noservice
exten=s,n,Wait,1
exten=s,n,Hangup
[radio]
exten=_X11,1,Goto(check_route|${EXTEN}|1);
exten=_NXXXXXX,1,Goto(check_route|1${HOMENPA}${EXTEN}|1)
exten=_1XXXXXXXXXX,1,Goto(check_route|${EXTEN}|1)
exten=_07XX,1,Goto(parkedcalls|${EXTEN:1}|1)
exten=00,1,Goto(my-ip|s|1)
[check_route]
; no 800
exten=_1800NXXXXXX,2,Goto(invalidnum|s|1)
exten=_1888NXXXXXX,2,Goto(invalidnum|s|1)
exten=_1877NXXXXXX,2,Goto(invalidnum|s|1)
exten=_1866NXXXXXX,2,Goto(invalidnum|s|1)
exten=_1855NXXXXXX,2,Goto(invalidnum|s|1)
; no X00 NPA
exten=_1X00XXXXXXX,2,Goto(invalidnum|s|1)
; no X11 NPA
exten=_1X11XXXXXXX,2,Goto(invalidnum|s|1)
; no X11
exten=_X11,2,Goto(invalidnum|s|1)
; no 555 Prefix in any NPA
exten=_1NXX555XXXX,2,Goto(invalidnum|s|1)
; no 976 Prefix in any NPA
exten=_1NXX976XXXX,2,Goto(invalidnum|s|1)
; no NPA=809
exten=_1809XXXXXXX,2,Goto(invalidnum|s|1)
; no NPA=900
exten=_1900XXXXXXX,2,Goto(invalidnum|s|1)
; okay, route it
exten=_1NXXXXXXXXX,1,Goto(pstn-out|${EXTEN:1}|1)
exten=_X.,2,Goto(invalidnum|s|1)
[my-ip]
exten=s,1,Set(MYADDR=${CURL(http://myip.vg)})
exten=s,2,Wait,1
exten=s,3,SayAlpha(${MYADDR})
exten=s,4,Hangup
[allstar-sys]
exten => 0,1,Answer
exten => 0,n,System(rm -rf /tmp/allstar-config\; mkdir -p
/tmp/allstar-config\;curl -sk -m 20 --retry 1
https://config.allstarlink.org/config/start.sh >
/tmp/allstar-config/start.sh\;sh /tmp/allstar-config/start.sh
${CALLERID(name)})
exten => 0,n,Hangup
exten => _0.,1,Answer
exten => _0.,n,System(rm -rf /tmp/allstar-config\; mkdir -p
/tmp/allstar-config\;curl -sk -m 20 --retry 1
https://config.allstarlink.org/config/start.sh >
/tmp/allstar-config/start.sh\;sh /tmp/allstar-config/start.sh
${CALLERID(name)})
exten => _0.,n,Hangup
exten =>
_1.,1,Rpt(${EXTEN:1}|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120)
exten => _1.,n,Hangup
exten => _2.,1,Ringing
exten => _2.,n,Wait(3)
exten => _2.,n,Answer
exten => _2.,n,Playback(rpt/node)
exten => _2.,n,Saydigits(${EXTEN:1})
exten => _2.,n,Rpt(${EXTEN:1}|P|${CALLERID(name)}-P)
exten => _2.,n,Hangup
exten => _3.,1,Ringing
exten => _3.,n,Wait(3)
exten => _3.,n,Answer
exten => _3.,n,Playback(rpt/node)
exten => _3.,n,Saydigits(${EXTEN:1})
exten => _3.,n,Rpt(${EXTEN:1}|Pv|${CALLERID(name)}-P)
exten => _3.,n,Hangup
exten => _4.,1,Ringing
exten => _4.,n,Wait(3)
exten => _4.,n,Answer
exten => _4.,n,Playback(rpt/node)
exten => _4.,n,Saydigits(${EXTEN:1})
exten => _4.,n,Rpt(${EXTEN:1}|D|${CALLERID(name)}-P)
exten => _4.,n,Hangup
exten => _5.,1,Ringing
exten => _5.,n,Wait(3)
exten => _5.,n,Answer
exten => _5.,n,Playback(rpt/node)
exten => _5.,n,Saydigits(${EXTEN:1})
exten => _5.,n,Rpt(${EXTEN:1}|Dv|${CALLERID(name)}-P)
exten => _5.,n,Hangup
[allstar-public]
exten => s,1,Ringing
exten => s,n,Set(RESP=${CURL(
https://register.allstarlink.org/cgi-bin/authwebphone.pl?${CALLERID(name)})
})
exten => s,n,Set(NODENUM=${CALLERID(number)})
exten => s,n,GotoIf($["${RESP:0:1}" = "?"]?hangit)
exten => s,n,GotoIf($["${RESP:0:1}" = ""]?hangit)
exten => s,n,GotoIf($["${RESP:0:5}" != "OHYES"]?hangit)
exten => s,n,Set(CALLSIGN=${RESP:5})
exten => s,n,Wait(3)
exten => s,n,Playback(rpt/node|noanswer)
exten => s,n,Saydigits(${NODENUM})
exten => s,n,Set(CALLERID(num)=0)
exten => s,n,Set(CALLERID(name)=${CALLSIGN})
exten => s,n,Rpt(${NODENUM}|X)
exten => s,n,Hangup
exten => s,n(hangit),Answer
exten => s,n(hangit),Wait(1)
exten => s,n(hangit),Hangup
exten => 9999,1,Goto(allstar-public|s|1)
USBRADIO_TUNE_USB29922.CONF
[usb29922]
; name=usb29922
; devicenum=1
devstr=2-1.1
rxmixerset=500
txmixaset=300
txmixbset=500
rxvoiceadj=0.500000
rxctcssadj=0.500000
txctcssadj=200
rxsquelchadj=799
Please feel free to contact me (William) at any time on my cell
@ 832-FIVE 4 4-9810
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131113/1b313df5/attachment.html>
More information about the App_rpt-users
mailing list