[App_rpt-users] Passing DTMF to another controller
C B
harvard5362 at yahoo.com
Sun Sep 8 17:03:29 UTC 2013
Hi
I am trying to get DTMF from other ALLSTAR nodes to pass to a controller connected to a node.
My configuration is a beagle board with the controller on port 2 (another controller will ne on port 1 latter).
I have set in the RPT.CONF
linktolink=yes
propagate_dtmf=yes
On both nodes.
Below I have copied my RPT.CONF information in case I have placed them in the wrong place or I have a syntax error or some other error.
Thank you in advance for any help.
Chris
; Radio Repeater configuration file (for use with app_rpt)
;
;
; Your Repeater
;
[29876] ; Change this to your assigned node number
rxchannel=Beagle/beagle29876
duplex=0
erxgain=-3
etxgain=3
;controlstates=controlstates
scheduler=schedule29876
morse=morse29876
macro=macro29876
functions=functions29876
phone_functions=functions29876
link_functions=functions29876
telemetry=telemetry
wait_times=wait-times
context = radio
callerid = "Repeater" <0000000000>
idrecording = |iN6LXX
accountcode=RADIO
hangtime=001
althangtime=100
totime=170000
idtime=540000
politeid=3000
linktolink=yes
propagate_dtmf=yes
idtalkover=|iN6LXX
unlinkedct=ct2
remotect=ct3
linkunkeyct=ct8
;nolocallinkct=0
;eannmode=1
;connpgm=yourconnectprogram
;discpgm=yourdisconnectprogram
;lnkactenable=0
;lnkacttime=1800
;lnkactmacro=*52
;lnkacttimerwarn=30seconds
;remote_inact_timeout=1800
;remote_timeout=3600
nounkeyct=1
;holdofftelem=0
beaconing=0
;
; *** Status Reporting ***
;
; Uncomment the either group following two statpost lines to report the status of your node to stats.allstarlink.org
; depending on whether you are running ACID or Limey Linux.
; ** For ACID ***
statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
; ** For Limey Linux **
;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
;
; Morse code parameters, these are common to all repeaters.
;
[morse29876]
speed=18
frequency=800
amplitude=4096
idfrequency=750
idamplitude=1024
[schedule29876]
;dtmf_function = m h dom mon dow ; ala cron, star is implied
[functions29876]
1=ilink,1
2=ilink,2
3=ilink,3
4=ilink,4
5=macro,1
70=ilink,5
71=ilink,6
72=ilink,7
73=ilink,15
74=ilink,16
75=ilink,8
80=status,1
81=status,2
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up
0=autopatchdn ; Autopatch down
989=cop,4
980=status,3
99=cop,6
; Place command macros here
[macro29876]
[29877] ; Change this to your assigned node number
rxchannel=Beagle/beagle29877
duplex=0
erxgain=-3
etxgain=3
;controlstates=controlstates
scheduler=schedule29877
morse=morse29877
macro=macro29877
functions=functions29877
phone_functions=functions29877
link_functions=functions29877
telemetry=telemetry
wait_times=wait-times
context = radio
callerid = "Repeater" <0000000000>
idrecording = |iN6LXX
accountcode=RADIO
hangtime=100
althangtime=100
totime=170000
idtime=540000
politeid=3000
linktolink=yes
propagate_dtmf=yes
idtalkover=|iN6LXX
unlinkedct=ct2
remotect=ct3
linkunkeyct=ct8
;nolocallinkct=0
;eannmode=1
;connpgm=yourconnectprogram
;discpgm=yourdisconnectprogram
;lnkactenable=0
;lnkacttime=1800
;lnkactmacro=*52
;lnkacttimerwarn=30seconds
;remote_inact_timeout=1800
;remote_timeout=3600
nounkeyct=0
;holdofftelem=0
beaconing=0
;
; *** Status Reporting ***
;
; Uncomment the either group following two statpost lines to report the status of your node to stats.allstarlink.org
; depending on whether you are running ACID or Limey Linux.
; ** For ACID ***
statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
; ** For Limey Linux **
;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
;
; Morse code parameters, these are common to all repeaters.
;
[morse29877]
speed=18
frequency=800
amplitude=4096
idfrequency=750
idamplitude=1024
[schedule29877]
;dtmf_function = m h dom mon dow ; ala cron, star is implied
[functions29877]
1=ilink,1
2=ilink,2
3=ilink,3
4=ilink,4
5=macro,1
70=ilink,5
71=ilink,6
72=ilink,7
73=ilink,15
74=ilink,16
75=ilink,8
80=status,1
81=status,2
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up
0=autopatchdn ; Autopatch down
989=cop,4
980=status,3
99=cop,6
; Place command macros here
[macro29877]
[telemetry]
ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
ct2=|t(660,880,150,2048)
ct3=|t(440,0,150,4096)
ct4=|t(550,0,150,2048)
ct5=|t(660,0,150,2048)
ct6=|t(880,0,150,2048)
ct7=|t(660,440,150,2048)
ct8=|t(700,1100,150,2048)
remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
remotemon=|t(1209,0,50,2048)
cmdmode=|t(900,903,200,2048)
functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
patchup=rpt/callproceeding
patchdown=rpt/callterminated
;
; This section allows wait times for telemetry events to be adjusted
; A section for wait times can be defined for every repeater
;
[wait-times]
telemwait=2000
idwait=500
unkeywait=2000
calltermwait=2000
;
; This is where you define your nodes which cam be connected to.
;
[nodes]
; Note, if you are using automatic update for allstar link nodes,
; no allstar link nodes should be defined here. Only place a definition
; for your locak nodes, and private (off of allstar link) nodes here.
29876 = radio at 127.0.0.1/29876,NONE
29877 = radio at 127.0.0.1/29877,NONE
; Memories for remote bases
[memory]
;00 = 146.580,100.0,m
;01 = 147.030,103.5,m+t
;02 = 147.240,103.5,m+t
;03 = 147.765,79.7,m-t
;04 = 146.460,100.0,m
;05 = 146.550,100.0,m
#includeifexists custom/rpt.conf
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130908/2ea61d60/attachment.html>
More information about the App_rpt-users
mailing list