[App_rpt-users] Remote base Memories

[Robert A. Poff]

Try numbering your memories from 00 to 99 instead of three digits. 



Mark Johnston <markjohnston73 at gmail.com> wrote:
>Hello everyone,
>
>I have finally got the ic-706 remote base partially working
>I can scan freq, move up in freq, and read status, Now that the
>commands
>also the init=freq..... works when I connect so it can set the
>frequency.
>just fine, yet if I do *1444*000*0... etc does not work
>If I do *0001 for memory 001 etc, I get 'memory not found'
>
>which the memory is in the rpt.conf
>
>[memory]
>  ;Syntax : CC=RRR.RRR,PPP.P,AAAAA
>  ;          C=Channel Number
>  ;          R=RX Frequency
>  ;          P=PL Frequency
>  ;          A=Attributes
>  ;
>  ;Attributes : a=AM   b=LSB  f=FM  u=USB
>  ;             l=Low Power   m=Medium Power   h=High Power
>  ;             -=Minus TX Offset    s=Simplex     +=Plus TX Offset
>  ;             t=TX PL on    r=RX PL on
>  ;
>004=147.700,123.0,fshrt
>005=147.100,123.0,fshtt
>006=003.860,100.0,bshrt
>init=003.980,100.0,bshrt ;Set to this on startup
>
>
>This is just above the macro section below the functions-remote...
>
>At the end of the file I tried[memory]
>
>[memory]
>001=147.700,123.0,fshrt
>002=147.100,123.0,fshtt
>003=003.860,100.0,bshrt
>
>
>None of these work, always says 'memory not found'
>
>Any ideas? I know I am getting close to making this work!
>
>0=remote,1                             ; Retrieve Memory
>1=remote,2
>
>Mark KC7DMF
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-- 
Sent from my Android phone with K-9 Mail. Please excuse my brevity and typing errors.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130920/a4ca9ebf/attachment.html>