[App_rpt-users] RTCM squelch tail elimination?

[Tim Sawyer]

Simpleusb has nothing to do with RTCMs. You should not have a simpleusb.conf on your system if your only interface is a RTCM. 

When you have set the RTCM COR type = 1 the squelch tail comes from your radio, or rather the Doug Hall voter in your case. As far as I know there is no STE setting anywhere in app_rpt or any of it’s channel drivers including chan_voter.

Have you considered connecting RTCMs to your receivers and let them vote in place of the Doug Hall?

--
Tim
:wq

On Apr 20, 2014, at 12:53 PM, Sam Nabkey <sam.nabkey at gmail.com> wrote:

> 
> Hello all...
> 
> I have replaced a repeater controller with a RTCM and a  server.
> 
> All is well but for a heavy squelch tail after carrier drop.  I am using the unit in simple mode because  I do not have an active discriminator output because I am using the RTCM behind a Doug Hall voter.
> 
> I have Googled the subject to death and I see plenty of mentioned items regarding simpleusb and usb settings but nothing on voter configuration.   Am I missing something someplace?
> 
> Thanks in advance for all the information.
> 
> You all are some of the smartest folks I know.  
> 
> Sam K8SN
> 
> 
>     
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140420/dd35e4ce/attachment.html>