[App_rpt-users] Simple I/O interface

[Tim Sawyer]

You’ll probably find a script here you can use or adapt: http://www.qsl.net/k0kn/scripts.html
--
Tim
:wq

On Aug 3, 2014, at 9:06 AM, Skyler F <electricity440 at gmail.com> wrote:

> Hi,
> 
> I have some cooling fans. 
> 
> I would like to have the fans turn ON when the radio transmits, and stay on for sixty seconds after the radio stops transmitting and then turn off. 
> 
> I would like to use the I/O interface on my URIx. (The I/O will then trigger a Solid State Relay ,and then turn on the Fans)
> 
> How can I do this with the software? Can I write it with Scripts?
> 
>  What commands would I need to detect if it is sending a PTT, detect PTT off, wait time, turn the output to high, turn the output to low, always "look" for a TX, etc.
> 
> Example code is always really nice for a beginner like me :-)
> 
> 73
> 
> Skyler
> KDØWHB
> 
> -- 
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140803/2f758e70/attachment.html>