[App_rpt-users] Simple I/O interface

[Bryan D. Boyle]

using kyle's scripts and the curcuit on the dmkeng.com website nicely for a couple years.  No issues; start up at 20 sec into key up and run for 2 min after.  off rest of time.

--
Bryan
Sent from my iPhone 5...No electrons were harmed in the sending of this message.



> On Aug 3, 2014, at 12:12, Tim Sawyer <tim.sawyer at mac.com> wrote:
> 
> You’ll probably find a script here you can use or adapt: http://www.qsl.net/k0kn/scripts.html
> --
> Tim
> :wq
> 
>> On Aug 3, 2014, at 9:06 AM, Skyler F <electricity440 at gmail.com> wrote:
>> 
>> Hi,
>> 
>> I have some cooling fans. 
>> 
>> I would like to have the fans turn ON when the radio transmits, and stay on for sixty seconds after the radio stops transmitting and then turn off. 
>> 
>> I would like to use the I/O interface on my URIx. (The I/O will then trigger a Solid State Relay ,and then turn on the Fans)
>> 
>> How can I do this with the software? Can I write it with Scripts?
>> 
>>  What commands would I need to detect if it is sending a PTT, detect PTT off, wait time, turn the output to high, turn the output to low, always "look" for a TX, etc.
>> 
>> Example code is always really nice for a beginner like me :-)
>> 
>> 73
>> 
>> Skyler
>> KDØWHB
>> 
>> -- 
>> Skyler Fennell
>> amsatnet.info
>> KDØWHB
>> electricity440 at gmail.com
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140803/36ca9ecf/attachment.html>