[App_rpt-users] Best way to link multiple nodes

[Bryan D. Boyle]

set up a hub node (use Zap/pseudo instead of Radio/usbxxxxx in your rpt.conf file for the rxchannel value) and connect your nodes to the hub.

easy peasy lemon squeezy

--
Bryan
Sent from my iPhone 5...No electrons were harmed in the sending of this message.



> On Dec 16, 2014, at 10:40, Mike M <kf7mbk at w7ara.net> wrote:
> 
> I have set up an allstar system with 5 private nodes (soon to be 7).
> 
> I can link the individual nodes to one another, or say 4 of the nodes
> to the 5th, but is there a better way?  I was looking at ConfBridge
> but couldn't get it to work.. not even sure it would work.
> 
> I tried several things (I'm still learning) but I made an entry under
> [radio-secure]
> exten => 1000,1,ConfBridge(101)
> 
> I was hoping to be able to do *31000 and connect to the bridge.  But
> it did nothing.
> 
> I just want to be able to have multiple bridges and be free to connect
> any node to any bridge.  If I connect all the nodes to a single node,
> I can no longer take that single node and connected it to something
> else without disconnecting all the other nodes connected to it.
> 
> Just not sure what the norm is...if there is one.
> 
> Thanks
> -Mike
> KF7MBK
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141216/16984fed/attachment.html>