[App_rpt-users] Need a clarification -- please

[Sam Nabkey]

Larry...

You just need to issue the *3 or the *2 command.  No need to issue the
disconnect first.

Sam


On Dec 26, 2014 3:01 AM, "larry" <larry at n7fm.com> wrote:

> Going to create some macros but need to understand this sequence before
> hand.
>
> I want to create a macro that connects a node to another node/hub in the
> (*2 monitor only) mode.
>
> Later if I wish to change that same connection to a (*3 transceive) mode.
> Would a macro need to first issue a *1 disconnect and then reconnect with
> a *3 function or can you just issue the *3 command and toggle directly from
> monitor to transceive?
>
> I assume whatever sequence works in one direction would hold true if going
> in reverse from tranceive to monitor only.
>
> Thanks
> Larry - N7FM
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
> mailman/listinfo/app_rpt-users and scroll down to the bottom of the page.
> Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141226/5643a8e7/attachment.html>