[App_rpt-users] Need a clarification -- please

[larry]

Thanks Stan and Mike,

Being able to toggle between modes is what I needed to know.

Mike,  I did understand about node numbers needing to be part of the *3 
or *2 command but thanks for including that information in your explanation.
Since I didn't include the full command structure inside my question 
your answer may clarify that point for someone that I may have confused 
by not doing so.

Larry - N7FM




On 12/26/2014 01:57 AM, mike at midnighteng.com wrote:
>
> Larry,
>
> Yes for the most part...
>
> *2 29283  -con mon
> *3 29283  -con tx-rx
>
> *3 alone will do nothing
>
> *1 29283  -disconnect only 29283
> *1        -alone will do nothing
> *71       -will disconnect every node connected to you mon or tx
>
> Command is the same live or macro.
>
> You do not need to disconnect (*71 or *1xxxxx) from monitor to switch
> the same node to tx.
>
> Just issue the *3xxxxx
>
>
> ...mike/kb8jnm
>
>
>> -------- Original Message --------
>> Subject: [App_rpt-users] Need a clarification -- please
>> From: larry <larry at n7fm.com>
>> Date: Fri, December 26, 2014 2:52 am
>> To: app_rpt-users at ohnosec.org
>>
>>
>> Going to create some macros but need to understand this sequence before
>> hand.
>>
>> I want to create a macro that connects a node to another node/hub in the
>> (*2 monitor only) mode.
>>
>> Later if I wish to change that same connection to a (*3 transceive) mode.
>> Would a macro need to first issue a *1 disconnect and then reconnect
>> with a *3 function or can you just issue the *3 command and toggle
>> directly from monitor to transceive?
>>
>> I assume whatever sequence works in one direction would hold true if
>> going in reverse from tranceive to monitor only.
>>
>> Thanks
>> Larry - N7FM
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>