[App_rpt-users] Error Message When Attempting to Connect

[Steve Zingman]

David,
Try this:

On the hub box:
41488 = radio at 127.0.0.1:4572/41488,NONE
40968 = radio at 192.168.20.243:4569/40968,NONE

On the repeater box:
40968 = radio at 127.0.0.1:4569/40968,NONE
41488 = radio at 192.168.20.235:4572/41488,NONE


73, Steve N4IRS


On 12/28/2014 12:28 PM, app_rpt-users-request at ohnosec.org wrote:
> Message: 1
> Date: Sun, 28 Dec 2014 10:00:41 -0700
> From: "David Dean K0PWO"<david at k0pwo.com>
> To: "'Jim Duuuude'"<telesistant at hotmail.com>,	"'Allstar app_rpt-users
> 	Group'"<app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Error Message When Attempting to Connect
> 	to	my	hub
> Message-ID:<006101d022bf$d064a8a0$712df9e0$@k0pwo.com>
> Content-Type: text/plain; charset="utf-8"
>
> This morning I followed the advice given by several members on the list. I added in the nodes section of both system
>
>
>
> 40968 =radio at 192.168.20.1/40963,NONE  <mailto:radio at 192.168.20.1/40963,NONE>   on the hub box
>
> 41488 =radio at 192.168.20.1/41488,NONE  <mailto:radio at 192.168.20.1/41488,NONE>   on the repeater box
>
>
>
> And I still get connection failed error messages
>
>
>
> Some back ground on what I have
>
>
>
> *         Comcast internet
>
> *         The Comcast supplied modem/router is bridged for modem gateway only
>
> *         ASUS RT-AC68U Router which feeds a Cisco Switch which both boxes are currently plugged into
>
> *         Node 41488 is my hub node and has port forwarding for port 4572 which it is assigned and configured
>
> *          NODE 40968 is my repeater node and port forwarding for port 4569 which it is assigned and configured
>
> *         Both machines for the moment have ssh of 222 (default) set
>
> *         41488 (my hub) is using static ip (on my LAN) of 192.168.20.235
>
> *         40968 (my repeater) is using static ip (on my LAN) of 192.168.20.243
>
>
>
> The repeater was working fine up until about a month ago when It quit connecting to any nodes.
>
>
>
> This morning I reset my router and reconfigured anything ? no change
>
> This morning I reformatted my repeater box and reconfigured using the Allstar Portal ? no change
>
>