[App_rpt-users] Error Message When Attempting to Connect

[David Dean K0PWO]

Hello Steve,

That worked perfectly for my node connecting to my hub which is on the same
LAN. So that part is working now. However, my repeater node will still not
connect outbound to any other nodes which has me stumped. 

However, another node was able to connect to my repeater node with an
inbound connection just a few minutes ago. 

So any ideas as to what I should look at for my outbound node connection
problem?

Thanks again,

David

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Steve Zingman
Sent: Sunday, December 28, 2014 11:39 AM
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Error Message When Attempting to Connect

David,
Try this:

On the hub box:
41488 = radio at 127.0.0.1:4572/41488,NONE
40968 = radio at 192.168.20.243:4569/40968,NONE

On the repeater box:
40968 = radio at 127.0.0.1:4569/40968,NONE
41488 = radio at 192.168.20.235:4572/41488,NONE


73, Steve N4IRS


On 12/28/2014 12:28 PM, app_rpt-users-request at ohnosec.org wrote:
> Message: 1
> Date: Sun, 28 Dec 2014 10:00:41 -0700
> From: "David Dean K0PWO"<david at k0pwo.com>
> To: "'Jim Duuuude'"<telesistant at hotmail.com>,	"'Allstar app_rpt-users
> 	Group'"<app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] Error Message When Attempting to Connect
> 	to	my	hub
> Message-ID:<006101d022bf$d064a8a0$712df9e0$@k0pwo.com>
> Content-Type: text/plain; charset="utf-8"
>
> This morning I followed the advice given by several members on the list. I
added in the nodes section of both system
>
>
>
> 40968 =radio at 192.168.20.1/40963,NONE
<mailto:radio at 192.168.20.1/40963,NONE>   on the hub box
>
> 41488 =radio at 192.168.20.1/41488,NONE
<mailto:radio at 192.168.20.1/41488,NONE>   on the repeater box
>
>
>
> And I still get connection failed error messages
>
>
>
> Some back ground on what I have
>
>
>
> *         Comcast internet
>
> *         The Comcast supplied modem/router is bridged for modem gateway
only
>
> *         ASUS RT-AC68U Router which feeds a Cisco Switch which both boxes
are currently plugged into
>
> *         Node 41488 is my hub node and has port forwarding for port 4572
which it is assigned and configured
>
> *          NODE 40968 is my repeater node and port forwarding for port
4569 which it is assigned and configured
>
> *         Both machines for the moment have ssh of 222 (default) set
>
> *         41488 (my hub) is using static ip (on my LAN) of 192.168.20.235
>
> *         40968 (my repeater) is using static ip (on my LAN) of
192.168.20.243
>
>
>
> The repeater was working fine up until about a month ago when It quit
connecting to any nodes.
>
>
>
> This morning I reset my router and reconfigured anything ? no change
>
> This morning I reformatted my repeater box and reconfigured using the
Allstar Portal ? no change
>
>
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.