[App_rpt-users] Error Message When Attempting to Connect

[Jim Duuuude]

Well, that's really interesting, because I just connected node 2002 to your node 41488,
then remote controlled it to connect outbound to 2009, both of which worked just fine.

try it again.

Jim, WB6NIL

> From: david at k0pwo.com
> To: szingman at msgstor.com; app_rpt-users at ohnosec.org
> Date: Sun, 28 Dec 2014 11:54:19 -0700
> Subject: Re: [App_rpt-users] Error Message When Attempting to Connect
> 
> Hello Steve,
> 
> That worked perfectly for my node connecting to my hub which is on the same
> LAN. So that part is working now. However, my repeater node will still not
> connect outbound to any other nodes which has me stumped. 
> 
> However, another node was able to connect to my repeater node with an
> inbound connection just a few minutes ago. 
> 
> So any ideas as to what I should look at for my outbound node connection
> problem?
> 
> Thanks again,
> 
> David
> 
> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org
> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Steve Zingman
> Sent: Sunday, December 28, 2014 11:39 AM
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Error Message When Attempting to Connect
> 
> David,
> Try this:
> 
> On the hub box:
> 41488 = radio at 127.0.0.1:4572/41488,NONE
> 40968 = radio at 192.168.20.243:4569/40968,NONE
> 
> On the repeater box:
> 40968 = radio at 127.0.0.1:4569/40968,NONE
> 41488 = radio at 192.168.20.235:4572/41488,NONE
> 
> 
> 73, Steve N4IRS
> 
> 
> On 12/28/2014 12:28 PM, app_rpt-users-request at ohnosec.org wrote:
> > Message: 1
> > Date: Sun, 28 Dec 2014 10:00:41 -0700
> > From: "David Dean K0PWO"<david at k0pwo.com>
> > To: "'Jim Duuuude'"<telesistant at hotmail.com>,	"'Allstar app_rpt-users
> > 	Group'"<app_rpt-users at ohnosec.org>
> > Subject: Re: [App_rpt-users] Error Message When Attempting to Connect
> > 	to	my	hub
> > Message-ID:<006101d022bf$d064a8a0$712df9e0$@k0pwo.com>
> > Content-Type: text/plain; charset="utf-8"
> >
> > This morning I followed the advice given by several members on the list. I
> added in the nodes section of both system
> >
> >
> >
> > 40968 =radio at 192.168.20.1/40963,NONE
> <mailto:radio at 192.168.20.1/40963,NONE>   on the hub box
> >
> > 41488 =radio at 192.168.20.1/41488,NONE
> <mailto:radio at 192.168.20.1/41488,NONE>   on the repeater box
> >
> >
> >
> > And I still get connection failed error messages
> >
> >
> >
> > Some back ground on what I have
> >
> >
> >
> > *         Comcast internet
> >
> > *         The Comcast supplied modem/router is bridged for modem gateway
> only
> >
> > *         ASUS RT-AC68U Router which feeds a Cisco Switch which both boxes
> are currently plugged into
> >
> > *         Node 41488 is my hub node and has port forwarding for port 4572
> which it is assigned and configured
> >
> > *          NODE 40968 is my repeater node and port forwarding for port
> 4569 which it is assigned and configured
> >
> > *         Both machines for the moment have ssh of 222 (default) set
> >
> > *         41488 (my hub) is using static ip (on my LAN) of 192.168.20.235
> >
> > *         40968 (my repeater) is using static ip (on my LAN) of
> 192.168.20.243
> >
> >
> >
> > The repeater was working fine up until about a month ago when It quit
> connecting to any nodes.
> >
> >
> >
> > This morning I reset my router and reconfigured anything ? no change
> >
> > This morning I reformatted my repeater box and reconfigured using the
> Allstar Portal ? no change
> >
> >
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> the bottom of the page. Enter your email address and press the "Unsubscribe
> or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem. 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141228/106c9608/attachment.html>