[App_rpt-users] VOTER boards - separating rx/tx

[Tim Sawyer]

Of course each RTCM can transmit and receive. The receive only sites don’t have the transmit parameter in voter.conf. But you seem to be asking a different question. If so, could you restate it?
--
Tim
:wq

On Feb 1, 2014, at 10:23 AM, Steve Wright <stevewrightnz at gmail.com> wrote:

> Gurus!
> 
> Can I operate arbitrary recievers and transmitters with the voter boards, and separate them in config at chan_voter?
> 
> Background: Our terrain does not lend itself to a few high-sited duplexed repeaters (or rather we are not inclined to pay for it), so we are taking the non-duplexed distributed approach of locating recievers and transmitters at various sites on a non-contending basis and GPS locking them all together.  It seems to us that if we have a hole in some coverage, that it would easy (read - cheap) to throw another GM300 at the problem..
> 
> That is, site A has either a 6M transmitter and other 2M receiver, or otherwise non-contending combinations, and the corresponding pair for each repeater receiver or transmitter is actually located on a nearby site linked with 802.11an.
> 
> SO!  It looks at first glance that I must use a VOTER board for each rx AND each tx, but perhaps I can use some clever config and halve the number of VOTER boards I use.
> 
> 
> Many thanks,
> Steve
> 
> 
> -- 
> Meshnetworks - Rangitaiki Plains Rural Broadband Internet Providers
> +64 21 040 5067
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.