[App_rpt-users] Loosing TX

[Bob Roszkowski]

Hi Michael,

Thanks for the information to test the URI.  It does not seem the URI is
the issue.  I have swapped the URIs with new ones and they all did the same
thing.

I believe this issue is with the PC hardware or software.  Might be a USB
bus problem.  I will look further into it.




boB - W5EVH


On Fri, Feb 7, 2014 at 7:45 PM, Michael Hebert <mhebert1975 at gmail.com>wrote:

> You can try the uridiag  program.
>
> Q: How can I test my URI?
> A: Download the uridiag program located at
>
> http://svn.ohnosec.org/viewvc/projects/allstar/uridiag/trunk/?root=svn&view=tar
>
> Un-tar it and then 'make' it. Run ./uridiag and select option C. That will
> tell you how to make a
> loop-back connector for running the diagnostics. This is the same program
> we use to test each
> URI before it leaves the factory.
>
> Q: How can I make a loop-back cable to test my URI?
> A: Get a male DB-25 connector such as L717SDB25P from www.digikey.com .
> Then wire up
> the following connections:
> Pin 1 to Pin 7
> Pin 2 to Pin 3
> Pin 4 to Pin 8
> Pin 23 to Pin 24
> 10K Resistor between Pins 21 and 22
> 10K Resistor between Pins 21 and 23
> For URIx (CM119) only, also include the following connections:
> Pin 5 to Pin 10
> Pin 6 to Pin 11
>
>
>
> On Fri, Feb 7, 2014 at 3:22 PM, Bob Roszkowski <bob at w5evh.org> wrote:
>
>> Group,
>>
>> I have a site that is acting strange.  I have a server with a VHF(Mastr
>> II) and UHF(TKR-850) repeater, each with a URI.  Both repeaters are linked
>> together locally.  I noticed while someone is using the machine, the TX
>> will just stop while they are talking.  If I switch to the other repeater,
>> the TX is working fine.  The URIs Red LED goes out.  This happens to both
>> machines.   I have swapped and changed URIs and cables with no change.  Any
>> ideas?
>>
>> boB - W5EVH
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140210/e2434d58/attachment.html>