[App_rpt-users] Touch Tones

[Angelo Glorioso]

Hi Tim,

 Thanks all for the replies. I was trying to pass the tones via RF. Not to 
the next node per say.

73 de Angelo


----- Original Message ----- 
From: "Tim Sawyer" <tim.sawyer at mac.com>
To: "Buddy Brannan" <buddy at brannan.name>
Cc: "app_rpt mailing list" <app_rpt-users at ohnosec.org>
Sent: Thursday, February 20, 2014 9:10 AM
Subject: Re: [App_rpt-users] Touch Tones


Yes, Buddy you have it right. Let’s break it down:

* is the prefix, AKA the function (or start) character. 
http://ohnosec.org/drupal/node/133

4 is command mode (you exit with #). http://ohnosec.org/drupal/node/21

0 is a shortcut for last node number

So for propagate_dtmf to work you have to connect to the remote node and 
then go into command mode.

--
Tim
:wq

On Feb 20, 2014, at 6:30 AM, Buddy Brannan <buddy at brannan.name> wrote:

> Wouldn’t it have to be *4[node number] to guarantee that you’re commanding 
> the right node? *4 is the command to send commands to a remote node, thus 
> *40 would specify to control the most recently connected node, is that not 
> correct? Or did I get the wrong end of this?

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit 
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to 
the bottom of the page. Enter your email address and press the "Unsubscribe 
or edit options button"
You do not need a password to unsubscribe, you can do it via email 
confirmation. If you have trouble unsubscribing, please send a message to 
the list detailing the problem.