[App_rpt-users] Command to Disable/Enable ID

[Kenneth Grimard]

hi skyler

oops i forgot to include the link to the site.

http://www.qsl.net/k0kn/

ken n1dot



On 7/28/2014 3:08 PM, Kenneth Grimard wrote:
> hi skyler
>
> look at this site he has a lot of very useful script for allstar. take 
> a good look at the " astflip " script.
> it will do what you need. it will allow you to change to completely 
> different copy of rpt.conf.
>
> you set a rpt.normal file and a rpt.fipped file then what the script 
> will do is replace your rpt.conf with
>  the normal file or the flipped file upon demand via a dtmf command.
>
> it use this script to do exactly what you are trying to do twice a 
> week to feed a repeater system a skywarn net.
>
> And when i do that the script change the running config of allstar for 
> the net and turns off all courtesy tones
> and other stuff.
>
> ken n1dot
>
>
>
>
> On 7/28/2014 1:12 PM, Skyler F wrote:
>> I have a link to a remote repeater using the input frequency.
>>
>> We finally figured out how to execute a command when the last link 
>> disconnects but not when 1 link is still connected while the other 
>> disconnects.
>>
>> In the connect and disconnect script files, we have the DTMF dialing.
>>
>> *Is there a command I can use to completely disable the ID without 
>> disabling any other telemetry or changing anything else so I can put 
>> that in the script files? *
>>
>> The node ONLY needs to ID when it is transmitting, and the ONLY time 
>> it transmits is when it is connected to a link.
>>
>>
>> you might say "hey, what if you are only connected for 8 mins, not 10 
>> and it does not ID" , well I will have it ID on disconnect.
>>
>> Thanks, this is the last problem we have to fix, and if not, our only 
>> other choice is to let the ID loop play every 10 mins.
>>
>> Skyler Fennell
>> amsatnet.info <http://amsatnet.info>
>> KDØWHB
>> electricity440 at gmail.com <mailto:electricity440 at gmail.com>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140728/aabe270a/attachment.html>