[App_rpt-users] Command to Disable/Enable ID

[Kenneth Grimard]

hi skyler

look at this site he has a lot of very useful script for allstar. take a 
good look at the " astflip " script.
it will do what you need. it will allow you to change to completely 
different copy of rpt.conf.

you set a rpt.normal file and a rpt.fipped file then what the script 
will do is replace your rpt.conf with
  the normal file or the flipped file upon demand via a dtmf command.

it use this script to do exactly what you are trying to do twice a week 
to feed a repeater system a skywarn net.

And when i do that the script change the running config of allstar for 
the net and turns off all courtesy tones
and other stuff.

ken n1dot




On 7/28/2014 1:12 PM, Skyler F wrote:
> I have a link to a remote repeater using the input frequency.
>
> We finally figured out how to execute a command when the last link 
> disconnects but not when 1 link is still connected while the other 
> disconnects.
>
> In the connect and disconnect script files, we have the DTMF dialing.
>
> *Is there a command I can use to completely disable the ID without 
> disabling any other telemetry or changing anything else so I can put 
> that in the script files? *
>
> The node ONLY needs to ID when it is transmitting, and the ONLY time 
> it transmits is when it is connected to a link.
>
>
> you might say "hey, what if you are only connected for 8 mins, not 10 
> and it does not ID" , well I will have it ID on disconnect.
>
> Thanks, this is the last problem we have to fix, and if not, our only 
> other choice is to let the ID loop play every 10 mins.
>
> Skyler Fennell
> amsatnet.info <http://amsatnet.info>
> KDØWHB
> electricity440 at gmail.com <mailto:electricity440 at gmail.com>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140728/67b4e3ad/attachment.html>