[App_rpt-users] Playing mp3 files in app_rpt
kk6ecm
kk6ecm at gmail.com
Fri Jun 6 11:16:43 UTC 2014
The issue I've had is the fact The I'd does not play till the end, ignoring the FCC req of 10 minutes. And, being some what of a Linux newby, I'd like to understand your input below,
"$~> sox newline_file(x) id_file newsline_file_id(x)
(where 'x' denotes which newsline file, since the one long file is chunked up into several pieces.)"
I'm aware of the partition ID in the ARRL news file, but don't know how to take advantage of it automatically. Does your command line address this? If so how? For sure, I'm missing something here.
Thanks much,
Bob
kk6ecm
Sent from iPad
On Jun 6, 2014, at 6:55 AM, Geoff <ars.w5omr at gmail.com> wrote:
>
> On 05/30/2014 12:12 AM, Bob wrote:
>>
>> So... I’ve been researching several options, finally downloaded the asterisk-addons, and installed. The mp3 download of the ARRL News plays, however, I’d like to have the idtalkover=|i<call sign> function as well. I get the Morse Code id at the end of the ARRL News, but not during at the defined interval. Any ideas?
>
> Of course, it depends on how often you've got your ID set to go off.
>
> context = radio
>
> ;idrecording = w5omr-repeater ; this plays a file that's located in /var/lib/asterisk/sounds/
> idrecording = |iW5OMR/R ;node Identification. the lower case i means it's to be CW.
> accountcode=RADIO
> hangtime=400 ; repeater hang-time. I like 'em short.
> ;althangtime=4000
> totime=540000 ;time out timer in milliseconds 60000 miliseconds in a minute.
> idtime=600000 ;how often node id's in milliseconds.
> ;politeid=3000 ; how long allstar waits to id while there's a carrier present before it ID's anyway.
>
> When you're setting up your script to play Newsline, just add your id file to the end of the newsline file.
>
> $~> sox newline_file(x) id_file newsline_file_id(x)
> (where 'x' denotes which newsline file, since the one long file is chunked up into several pieces.)
>
> That's -one- way to look at it... I'm sure there are several others.
> It's Linux!
>
> -Geoff/W5OMR
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140606/5d380324/attachment.html>
More information about the App_rpt-users
mailing list