[App_rpt-users] URI build uniformity

[Bob]

Thanks, and yes, the gains are set in /etc/asterisk... just swapping URIs

 

Thanks,

Bob

kk6ecm

 

  _____  

From: hotmail_97fc649978f54bf0 at live.com
[mailto:hotmail_97fc649978f54bf0 at live.com] On Behalf Of Doug Crompton
Sent: Thursday, March 13, 2014 8:47 PM
To: Bob
Cc: app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] URI build uniformity

 

The URI has the capability to use an EEPROM  to store the radio settings.
The EEPROM is installed inside the cable connector to the radio so the
settings are remembered for that radio and in that case when changing the
URI it would read the EERPOM data for that radio. The cable would stay with
the radio.  Most people do not use that method though and I suspect you
aren't either. Without the EEPROM the config values are stored on the
computer for the node so if you swap URI's and restart Allstar it should
have the same levels for that node and radio. The config settings are stored
in /etc/asterisk. So you can swap URI's but not radios (unless they were
setup exactly the same) without changing anything.

The EEPROM option is an added cost when you buy it but you could buy your
own 93C46 and wire it into the connector. The advantage would be that once
you stored the configuration for the radio in the EEPROM you could connect
that radio and cable to any URI and Allstar computer without further
configuration. There is a setting for this in the simpleusb or usbradio
config files.

As far as build uniformity, I cannot speak for that but my guess would be
they are almost immeasurably close. 

73 Doug
WA3DSP
http://www.crompton.com/hamradio



> From: kk6ecm at gmail.com
> To: app_rpt-users at ohnosec.org
> Date: Thu, 13 Mar 2014 19:20:44 -0700
> Subject: [App_rpt-users] URI build uniformity
> 
> I am doing some troubleshooting on a repeater that uses ACID and two URIs.
> Can I swap the two URIs without readjusting gains? Also, I don't know
which
> version of URI we have; would need S/N range for each version. Can I swap
> out a URI with a URIx (new URI) without adjusting gains?
> 
> Thanks,
> Bob
> kk6ecm
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
> You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem. 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140313/6d1e964e/attachment.html>