[App_rpt-users] URIx with Icom IC-910 Data Jacks?

[Kevin Oleniczak]

I'm using usbradio and believe i have it all worked out now. Thanks folks
for the help. It was a mix of wiring and settings that got it all to work
just fine.


On Sat, Mar 15, 2014 at 3:39 PM, Doug Crompton <doug at crompton.com> wrote:

> Kevin,
>
>   You didn't say whether you were using simpleusb or usbradio.  For
> simpleusb you would use AF out and data in for audio, PTTP for PTT and SQL
> for COR.
>
> You do need to get the invert non-invert correct for PTT and COR. Both are
> switchable in the config file. Also if you are using a simplex node make
> sure you have Duplex=1    (or 0 if you don't want telemetry) in rpt.conf
> The default is 2 and that often gets people because as soon as OR goes high
> it goes into PTT as it would in a repeater setting.
>
> The squelch is usually PL driven in the radio as using just a squelch can
> give false COR indications with noise etc. I am not sure how that is
> handled in your radio but the Alinco COR output does follow PL.
>
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> Date: Thu, 13 Mar 2014 22:06:36 -0500
> From: n9jpg.ham at gmail.com
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] URIx with Icom IC-910 Data Jacks?
>
>
> Anyone know if either of the Icom data jacks can be used to work with the
> URIx successfully for a simplex node?
>
> Documentation notes this:
>
> DATA IN - Input terminal for data (common for both 1200 and 9600 bps)
> GND - Ground line for the DATA IN, DATA OUT and AF OUT.
> PTTP - Transmits when this terminal is grounded.
> DATA OUT - Received data output terminal for 9600 bps operation.
> AF OUT - Received data output terminal for 1200 bps operation.
> SQL - Output terminal for squelch condition (Open/Close). Outputs grounded
> level signal
> when squelch is opened, +8 V level signal when squelch is closed.
>
> I wired it up but not getting tx audio or rx audio to work. Tried using
> SQL with the URI COR_DET line. Maybe that's inverted here...
>
> Anyone have luck using this kind of data port to do the interfacing?
>
> thanks!
>
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
> from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button" You do not need a password to
> unsubscribe, you can do it via email confirmation. If you have trouble
> unsubscribing, please send a message to the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140316/86a00025/attachment.html>