[App_rpt-users] Voter board

[Corey]

Chuck,
Thanks for clarifying the IP issue. The board upgraded just fine once I 
made the change.

Corey
On 11/14/2014 11:27 PM, Chuck Henderson wrote:
> set the bootloader IP to be the same as the voter board IP, or make it 
> different than anything else on the network.  It is the IP that the 
> voter board uses when it is running the bootloader code.  It can not 
> have the same IP as your laptop.  That will not work.
>
> On Sat, Nov 15, 2014 at 12:10 AM, Corey <kc7mrq at bresnan.net 
> <mailto:kc7mrq at bresnan.net>> wrote:
>
>
>     I built a through hole voter board and interfaced it to a GPS 18
>     LVC and my server. I set the board up as a master, transmit. The
>     LED shows the GPS locked and 98 command shows the GPS,
>     but I am getting the following error when telnetting into the board:
>
>     Warning: GPS Data time period elapsed.
>
>     The error is timestamped and occurs every second. I made sure the
>     data format was NMEA per archived messages on here by connecting
>     the GPS to SNSRCFG. The config appears to be set up correctly.
>     What other areas do I need to look at to fix this warning?
>
>     I did notice you can choose quite a few NMEA messages in the
>     SNSRCFG profile. Does it matter if all are checked?
>
>     I have a second issue with updating the firmware. The board is at
>     Rev 1.41. I tried updating it, but haven't had any luck so far.
>     Nothing happens when I click on the "capture target" button after
>     resetting the voter board. The target ip is the voter board and
>     the bootloader ip in the voter is my laptop with ENC_Loader.
>
>      The IC(s) were originally programmed by a friend in another state
>     so I never experienced what it take to do the initial programming.
>
>
>     Thanks for your help,
>     Corey
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>     scroll down to the bottom of the page. Enter your email address
>     and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem. 
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20141115/ec68b94a/attachment.html>