[App_rpt-users] beastnode (was debian)
Rob Pectol - AH2S
rob at ah2s.org
Mon Sep 8 05:23:11 UTC 2014
Have the hosting provider load a 32-bit OS and you'll have more luck. However, even if you get through the install process, don't be surprised if you experience choppy and unpredictable audio. Many including myself have only had limited success running AllStar virtualized. Not saying it won't work, but don't be disappointed if it doesn't. Good luck...
--
Rob - AH2S
September 8 2014 1:32 PM, "pete M" wrote:
Ok got a 3 month account with them.. got debian 5 installed.. of course the kernel is way too new to install asterisk with out problem
here is the output for the version of the kernel.:
# cat /proc/version
Linux version 2.6.32-042stab093.4 (root at kbuild-rh6-x64) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Mon Aug 11 18:47:39 MSK 2014
So if I run phase2.sh from /etc/rc.d/ ( I did copy the script there and the acidrepo file at the same place, I have an error, can't compile zaptel.
here is the last few lines from the compiler:
make[3]: Leaving directory `/usr/src/astsrc/zaptel/menuselect/mxml'
gcc -o menuselect menuselect.o strcompat.o menuselect_stub.o mxml/libmxml.a mxml/libmxml.a
make[2]: Leaving directory `/usr/src/astsrc/zaptel/menuselect'
make[1]: Leaving directory `/usr/src/astsrc/zaptel/menuselect'
Generating input for menuselect ...
***********************************************************
The existing menuselect.makeopts file did not specify
that 'zttool' should not be included. However, either some
dependencies for this module were not found or a
conflict exists.
Either run 'make menuselect' or remove the existing
menuselect.makeopts file to resolve this issue.
***********************************************************
make: *** [menuselect.makeopts] Error 255
Failure: Unable to compile Zaptel 2
Fatal error: Unable to install Asterisk!
[root at node rc.d]#
Anyone have a simple answer to this? Do I need zaptel since I wont be connecting and radio directly to this server?
If I dont need it. How do I prevent the install script from compiling it?
Lots of question.. But I am not that used to such stuff ;-)
Pierre Martel
VE2PF
------------------------------------
From: petem001 at hotmail.com (mailto:petem001 at hotmail.com)
To: app_rpt-users at ohnosec.org (mailto:app_rpt-users at ohnosec.org)
Date: Sun, 7 Sep 2014 22:48:40 -0400
Subject: Re: [App_rpt-users] debian?
Never mind.. Just found out they can have a debian 5 installed..
https://www.beastnode.com/portal/knowledgebase/110/Operating-System-Templates-or-ISOs.html (https://www.beastnode.com/portal/knowledgebase/110/Operating-System-Templates-or-ISOs.html)
------------------------------------
From: petem001 at hotmail.com (mailto:petem001 at hotmail.com)
To: app_rpt-users at ohnosec.org (mailto:app_rpt-users at ohnosec.org)
Date: Sun, 7 Sep 2014 22:38:29 -0400
Subject: [App_rpt-users] debian?
I want to do a central node for my repeaters.. I have 2 repeater on a site , another is already online and 2 other comming in soon..
I want them linked permanently but dont want to have any of those server as the central node cause none have the abndwith for it..
So I stumbled on a company that host vps server for real cheap..
But they are on debian. is it possible to install a node on a debian system?
can someone point me in the right direction?
Thanks
Pierre VE2PF
president VE2MRC
for the curious.. here is the hosting company:
https://www.beastnode.com/vps (https://www.beastnode.com/vps)
_______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org (mailto:App_rpt-users at ohnosec.org) http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users (http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users (http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org (mailto:App_rpt-users at ohnosec.org) http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users (http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users (http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users) and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140908/74804a9c/attachment.html>
More information about the App_rpt-users
mailing list