[App_rpt-users] RXDELAY in XIPAR

[Tim Sawyer]

Really? You need a 3 second delay? 
--
Tim WD6AWP

> On Sep 22, 2014, at 5:13 AM, Lu Vencl <vencl at att.net> wrote:
> 
> I have a XIPAR node that needs a little support with pulseback removal. Never had to utilize this before, but when looking in URD.conf, I don’t see the rxdelay= parameter like I do on ACID builds. I went ahead and inserted the command into the file, but there does not seem to be any action.
> Can someone confirm the parameter and placement?
> Here is my example:
> [usb]
>  
> hdwtype=0           ; 0=std,1=dev
> eeprom=0            ; unless you have a cable w/eeprom
> duplex=0            ; 0=simplex, 1=duplex
> invertptt=0
> ;minsigproc=0        ; minimal signal processing
> ;sendvoter=0        ; 0=default, no voter rssi, 1=enable voter rssi
>  
> carrierfrom=usbinvert     ; no,usb,usbinvert,dsp,vox
> ctcssfrom=no        ; no,usb,dsp
> rxondelay=3000              ; Gets rid of the pulseback problem
> ;rxboost=1           ; rx input boost of 20dB
> rxboost=0            ; no boost
> rxdemod=flat        ; no,speaker,flat
> txprelim=0          ; 1 = pre-emphasize and limit
>  
> txmixa=voice        ; no,voice,tone,composite
> txmixb=tone         ; no,voice,tone,composite,auxvoice
>  
> ;txctcssdefault=77.0
> ;rxctcssfreqs=77.0;
> ;txctcssfreqs=77.0;
> txtoctype=notone;  
>  
> rxsquelchdelay=900    ; delayline in ms carrier squelch tail eliminator
> rxnoisefiltype=0    ; 0 for +/-5KHz, 2 for +/-2.5KHz systems
>  
>  
> Lu,
> KA4EPS
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140922/a5e08827/attachment.html>