[App_rpt-users] Rtcm configuration

[Tom Caspar]

Thank you.  That is exactly what I was looking for.



----- Reply message -----
From: "Tim Sawyer" <tim.sawyer at mac.com>
To: "Tom Caspar" <tom.caspar at cpcomms.com>
Cc: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: [App_rpt-users] Rtcm configuration
Date: Fri, Apr 10, 2015 1:13 PM

For RTCM control, touch tone functions can be set in the [functions] stanza like so:

where:
xy = two digit RX ‘prefix’
xx = two digit TX ‘prefix’
nnnn = the node number
site1-4 = the actual RTCM client name


; RTCM Rx control
xy1=cmd,#voter prio nnnn all 0        ; All RX on
xy20=cmd,#voter prio nnnn site1 -1    ; Disable site 1
xy21=cmd,#voter prio nnnn site1 0     ; Site 1 on
xy30=cmd,#voter prio nnnn site2 -1
xy31=cmd,#voter prio nnnn site2 0
xy40=cmd,#voter prio nnnn site3 -1
xy41=cmd,#voter prio nnnn site3 0
xy50=cmd,#voter prio nnnn site4 -1
xy51=cmd,#voter prio nnnn site4 0

; RTCM tx control
xx0=cmd,#voter txlockout nnnn all        ; All TX off
xx1=cmd,#voter txlockout nnnn none       ; All TX on
xx20=cmd,#voter txlockout nnnn +site1    ; Site 1 TX off
xx21=cmd,#voter txlockout nnnn -site1    ; Site 1 TX on
xx30=cmd,#voter txlockout nnnn +site2
xx31=cmd,#voter txlockout nnnn -site2
xx40=cmd,#voter txlockout nnnn +site3
xx41=cmd,#voter txlockout nnnn -site3
xx50=cmd,#voter txlockout nnnn +site4
xx51=cmd,#voter txlockout nnnn -site4


These commands work on the *CLI> like so:

*CLI> voter prio nnnn site1 -1

--
Tim
:wq

On Apr 10, 2015, at 8:24 AM, Tom Caspar <tom.caspar at cpcomms.com<mailto:tom.caspar at cpcomms.com>> wrote:

I’d like to be able to dynamically control  from a macro or the asterisk CLI, whether a particular rtcm in a voter node is enabled as a transmitter.  Is this possible without having to manually edit the voter.conf and restart asterisk?

Thanks,
Tom

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.