[App_rpt-users] Courtesy Tone when SIP connection unkeys

[Steve Agee]

My experience is that SIP connections use the "linkunkeyct" so be sure 
you have it pointing to a courtesy tone that is valid and has some value 
defined.

N5ZUA

On 12/15/2015 8:58 PM, mike at midnighteng.com wrote:
> Mike,
> You probably need to look at other setting to be sure...
> But first, be sure your current settings are not "out-of-range" and ignored.
> & Type errors etc.
>
> Some places to look...
> unlinkedct=ct2
> remotect=ct3
> linkunkeyct=ct8
> nolocallinkct=1   ; Use unlinkedct if only connected to a local node
> Just a thought...
>
> Be sure to fill us in if you find it.
>
> ...mike/kb8jnm
>
>
>> I have a private allstar node set up that allows a SIP connection.
>>
>> No matter what I do I can't seem to get allstar to TX a courtesy tone on
>> the radio when the SIP connection unkeys.  I feel like I've done this
>> before but I've set every courtesy tone to a valid tone in rpt.conf and I
>> get CT if the radio unkeys, but not if the SIP connection unkeys.  Is this
>> just not possible or am I being dumb?
>>
>>
>> Regards,
>> Mike Montalvo, KF7MBK
>> ARA Membership Chair
>> www.w7ara.org
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
>> bottom of the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If
>> you have trouble unsubscribing, please send a message to the list detailing the
>> problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>