[App_rpt-users] Asterisk RF Gateway via Satellite

[Doug Crompton]

Well iax re-registers once a minute and there is tons of status traffic outbound on a busy node.

You could just stay connected (permanan connect) to some outside hub and tell people to connect to you there. Then if you want to go private you can connect directly to them. I am sure there are plenty of nodes that would allow you to do that.

I have one here if you are looking for a place. 

73 Doug
WA3DSP
http://www.crompton.com/hamradio


> Date: Mon, 2 Feb 2015 22:07:38 -0600
> From: tf.ops2 at gmail.com
> To: doug at crompton.com
> Subject: Re: [App_rpt-users] Asterisk RF Gateway via Satellite
> 
> Inbound traffic (all ports) are blocked, unless there is originating 
> contact (such as registration - which works with SIP, but no such luck 
> with IAX2 yet).
> 
> On 02/02/2015 10:02 PM, Doug Crompton wrote:
> > Is it s specific port or ports that are firewalled? You can change 4569 IAX to whatever port# you want that isn't well know or being used.
> >
> > 73 Doug
> > WA3DSP
> > http://www.crompton.com/hamradio
> >
> >
> >> Date: Mon, 2 Feb 2015 21:39:40 -0600
> >> From: tf.ops2 at gmail.com
> >> To: app_rpt-users at ohnosec.org
> >> Subject: [App_rpt-users] Asterisk RF Gateway via Satellite
> >>
> >> Hello App_Rpt Group,  currently using Viasat's Exede for Internet
> >> services and need to find out how to  set up a Asterisk RF Gateway proxy
> >> in order to alleviate the inbound connection problem (outbound initiated
> >> connections work great, inbound connections never make it past the NOC
> >> firewall).   Would setting up a couple of private nodes at a server farm
> >> be beneficial?  Thank You in advance.
> >>
> >> Mars - N0PCO
> >>
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at ohnosec.org
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>
> >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> >>
> >   		 	   		
> 
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150202/585115ad/attachment.html>