[App_rpt-users] Node Status not showing...

[Jah Rastafari]

Sort of; I'm referring to the malfunction of the online/visual alternative
to querying which nodes one is connected to because the Alison verbal
readout pisses a lot of people off if you're connected to more than a
couple.

Oh and btw the account was originally setup with the tongue-in-cheek name
Jah Rastafari to order reggae records. I often forget it's even there.

-Bob/KK6RQ

On Mon, Jan 12, 2015 at 3:10 PM, Elden Fenison <w7ldn at w7ldn.com> wrote:

> Not sure if your name is Jah, or Bob. But at any rate, I recently setup my
> first simplex allstar node and managed to hit the wrong command sequence
> and triggered a long train of announcements listing all the connected
> nodes. You mean to say that I'm not the only one who heard that? Most
> embarrassing. It eventually stopped abruptly and I did find myself
> disconnected. Hmm...
>
>
> On Sun Jan 11 2015 at 8:26:09 PM Jah Rastafari <nuhtrue at gmail.com> wrote:
>
>> Yeah, I can wait and see what develops. It's not the end of the world;
>> it's just getting the online status is better manners than subjecting
>> everyone (who isn't on a repeater with unnecessary Alison jabbering
>> turned off) having to hear 30 repeater connections listed over the air...
>>
>> Bob/KK6RQ
>>
>> On Sun, Jan 11, 2015 at 8:28 PM, <mike at midnighteng.com> wrote:
>>
>>>
>>>
>>> You could be having some problems with internet host (especially if it
>>> is comcast).
>>> Probably temporary, don't go changing your settings over it just yet.
>>> Give it a few days and reboots (computer and router) to see how it pans
>>> out.
>>
>>
>>>
>>>
>>> ...mike/kb8jnm
>>>
>>> > -------- Original Message --------
>>>
>> > Subject: Re: [App_rpt-users] Node Status not showing...
>>> > From: Jah Rastafari <nuhtrue at gmail.com>
>>>
>> > Date: Sun, January 11, 2015 9:20 pm
>>> > To: mike at midnighteng.com,  "app_rpt-users at ohnosec.org"
>>> > <app_rpt-users at ohnosec.org>
>>> >
>>> >
>>> > I went back right after reading your reply (several hours after my
>>> original
>>> > post) and it in fact came up the way it should. But then 5 minutes
>>> > later it went back to saying I wasn't connected. I'm not sure what it
>>> means
>>> > but I can say I've never seen it behave like this before.
>>> >
>>> > On Sun, Jan 11, 2015 at 4:56 PM, <mike at midnighteng.com> wrote:
>>> >
>>> > >
>>> > >
>>> > >
>>> > > Not sure but....
>>> > >
>>> > > I think you are only suffering from a delay of the update to the
>>> list.
>>> > >
>>> > > Try waiting for a short while (up to 30min) and look again.
>>> > > Others have said it takes that long sometimes but I have only
>>> witnessed
>>> > > about 5-6min.
>>> > >
>>> > > Guess it depends on how busy the server is.
>>> > >
>>> > >
>>> > > ...mike/kb8jnm
>>> > >
>>> > > > -------- Original Message --------
>>> > > > Subject: [App_rpt-users] Node Status not showing...
>>> > > > From: Jah Rastafari <nuhtrue at gmail.com>
>>> > > > Date: Sun, January 11, 2015 5:29 pm
>>> > > > To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
>>> > > >
>>> > > >
>>> > > > Forgive me if this has already been discussed and I missed it, but
>>> I just
>>> > > > noticed recently that although I was connected to a number of other
>>> > > > nodes/repeaters, the 'Node Status' selection on the Allstar site
>>> says I'm
>>> > > > not connected to anything. My node(s) show up properly in the
>>> available
>>> > > > node list and everything else is as it should be. The Web
>>> Transceiver
>>> > > works
>>> > > > properly also and I haven't changed anything recently. Am I missing
>>> > > > something?
>>> > > >
>>> > > > Bob/ KK6RQ<hr>_______________________________________________
>>> > > > App_rpt-users mailing list
>>> > > > App_rpt-users at ohnosec.org
>>> > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> > > >
>>> > > > To unsubscribe from this list please visit
>>> > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down
>>> > > to the bottom of the page. Enter your email address and press the
>>> > > "Unsubscribe or edit options button"
>>> > > > You do not need a password to unsubscribe, you can do it via email
>>> > > confirmation. If you have trouble unsubscribing, please send a
>>> message to
>>> > > the list detailing the problem.
>>> > >
>>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
>> mailman/listinfo/app_rpt-users and scroll down to the bottom of the
>> page. Enter your email address and press the "Unsubscribe or edit options
>> button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150112/35c958e9/attachment.html>