[App_rpt-users] Node Status not showing...

Mon Jan 12 22:26:03 UTC 2015

There are two node list commands:

ilink 5 is list of directly connected nodes only. 
ilink 15 is full list of all connected nodes no mater how many hops away (AKA Long Range Sensors) 

I recommend using ilink 5 in your functions and the AllStar web site for the bigger picture. 

Neither command will cause remotes nodes to dump telemetry unless they have telemdefault=1 or you’re unlucky enough to hit their telemdefault=2 timeout window. 

--
Tim
:wq

> On Jan 12, 2015, at 1:47 PM, Jah Rastafari <nuhtrue at gmail.com> wrote:
> 
> Sort of; I'm referring to the malfunction of the online/visual alternative to querying which nodes one is connected to because the Alison verbal readout pisses a lot of people off if you're connected to more than a couple.
> 
> Oh and btw the account was originally setup with the tongue-in-cheek name Jah Rastafari to order reggae records. I often forget it's even there.
> 
> -Bob/KK6RQ
> 
> On Mon, Jan 12, 2015 at 3:10 PM, Elden Fenison <w7ldn at w7ldn.com <mailto:w7ldn at w7ldn.com>> wrote:
> Not sure if your name is Jah, or Bob. But at any rate, I recently setup my first simplex allstar node and managed to hit the wrong command sequence and triggered a long train of announcements listing all the connected nodes. You mean to say that I'm not the only one who heard that? Most embarrassing. It eventually stopped abruptly and I did find myself disconnected. Hmm...
> 
> 
> On Sun Jan 11 2015 at 8:26:09 PM Jah Rastafari <nuhtrue at gmail.com <mailto:nuhtrue at gmail.com>> wrote:
> Yeah, I can wait and see what develops. It's not the end of the world; it's just getting the online status is better manners than subjecting
> everyone (who isn't on a repeater with unnecessary Alison jabbering turned off) having to hear 30 repeater connections listed over the air...
> 
> Bob/KK6RQ
> 
> On Sun, Jan 11, 2015 at 8:28 PM, <mike at midnighteng.com <mailto:mike at midnighteng.com>> wrote:
> 
> 
> You could be having some problems with internet host (especially if it
> is comcast).
> Probably temporary, don't go changing your settings over it just yet.
> Give it a few days and reboots (computer and router) to see how it pans
> out.
> 
> 
> 
> ...mike/kb8jnm
> 
> > -------- Original Message --------
> > Subject: Re: [App_rpt-users] Node Status not showing...
> > From: Jah Rastafari <nuhtrue at gmail.com <mailto:nuhtrue at gmail.com>>
> > Date: Sun, January 11, 2015 9:20 pm
> > To: mike at midnighteng.com <mailto:mike at midnighteng.com>,  "app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>"
> > <app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>>
> >
> >
> > I went back right after reading your reply (several hours after my original
> > post) and it in fact came up the way it should. But then 5 minutes
> > later it went back to saying I wasn't connected. I'm not sure what it means
> > but I can say I've never seen it behave like this before.
> >
> > On Sun, Jan 11, 2015 at 4:56 PM, <mike at midnighteng.com <mailto:mike at midnighteng.com>> wrote:
> >
> > >
> > >
> > >
> > > Not sure but....
> > >
> > > I think you are only suffering from a delay of the update to the list.
> > >
> > > Try waiting for a short while (up to 30min) and look again.
> > > Others have said it takes that long sometimes but I have only witnessed
> > > about 5-6min.
> > >
> > > Guess it depends on how busy the server is.
> > >
> > >
> > > ...mike/kb8jnm
> > >
> > > > -------- Original Message --------
> > > > Subject: [App_rpt-users] Node Status not showing...
> > > > From: Jah Rastafari <nuhtrue at gmail.com <mailto:nuhtrue at gmail.com>>
> > > > Date: Sun, January 11, 2015 5:29 pm
> > > > To: "app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>" <app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>>
> > > >
> > > >
> > > > Forgive me if this has already been discussed and I missed it, but I just
> > > > noticed recently that although I was connected to a number of other
> > > > nodes/repeaters, the 'Node Status' selection on the Allstar site says I'm
> > > > not connected to anything. My node(s) show up properly in the available
> > > > node list and everything else is as it should be. The Web Transceiver
> > > works
> > > > properly also and I haven't changed anything recently. Am I missing
> > > > something?
> > > >
> > > > Bob/ KK6RQ<hr>_______________________________________________
> > > > App_rpt-users mailing list
> > > > App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> > > >
> > > > To unsubscribe from this list please visit
> > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down
> > > to the bottom of the page. Enter your email address and press the
> > > "Unsubscribe or edit options button"
> > > > You do not need a password to unsubscribe, you can do it via email
> > > confirmation. If you have trouble unsubscribing, please send a message to
> > > the list detailing the problem.
> > >
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150112/953749aa/attachment.html>