[App_rpt-users] Node Status not showing...

Tue Jan 13 00:23:54 UTC 2015

When I have a minute to poke my head above water I'll get on the air and
speak with you Tim and pummel you with questions
so I don't butcher things. I basically understand it, I just want to be
certain all my semicolons are where (and WHY) they're supposed to be.

Bob/KK6RQ

On Mon, Jan 12, 2015 at 4:26 PM, Tim Sawyer <tim.sawyer at mac.com> wrote:

> There are two node list commands:
>
> ilink 5 is list of directly connected nodes only.
> ilink 15 is full list of all connected nodes no mater how many hops away
> (AKA Long Range Sensors)
>
> I recommend using ilink 5 in your functions and the AllStar web site for
> the bigger picture.
>
> Neither command will cause remotes nodes to dump telemetry unless they
> have telemdefault=1 or you’re unlucky enough to hit their telemdefault=2
> timeout window.
>
> --
> Tim
> :wq
>
> On Jan 12, 2015, at 1:47 PM, Jah Rastafari <nuhtrue at gmail.com> wrote:
>
> Sort of; I'm referring to the malfunction of the online/visual alternative
> to querying which nodes one is connected to because the Alison verbal
> readout pisses a lot of people off if you're connected to more than a
> couple.
>
> Oh and btw the account was originally setup with the tongue-in-cheek name
> Jah Rastafari to order reggae records. I often forget it's even there.
>
> -Bob/KK6RQ
>
> On Mon, Jan 12, 2015 at 3:10 PM, Elden Fenison <w7ldn at w7ldn.com> wrote:
>
>> Not sure if your name is Jah, or Bob. But at any rate, I recently setup
>> my first simplex allstar node and managed to hit the wrong command sequence
>> and triggered a long train of announcements listing all the connected
>> nodes. You mean to say that I'm not the only one who heard that? Most
>> embarrassing. It eventually stopped abruptly and I did find myself
>> disconnected. Hmm...
>>
>>
>> On Sun Jan 11 2015 at 8:26:09 PM Jah Rastafari <nuhtrue at gmail.com> wrote:
>>
>>> Yeah, I can wait and see what develops. It's not the end of the world;
>>> it's just getting the online status is better manners than subjecting
>>> everyone (who isn't on a repeater with unnecessary Alison jabbering
>>> turned off) having to hear 30 repeater connections listed over the air...
>>>
>>> Bob/KK6RQ
>>>
>>> On Sun, Jan 11, 2015 at 8:28 PM, <mike at midnighteng.com> wrote:
>>>
>>>>
>>>>
>>>> You could be having some problems with internet host (especially if it
>>>> is comcast).
>>>> Probably temporary, don't go changing your settings over it just yet.
>>>> Give it a few days and reboots (computer and router) to see how it pans
>>>> out.
>>>
>>>
>>>>
>>>>
>>>> ...mike/kb8jnm
>>>>
>>>> > -------- Original Message --------
>>>>
>>> > Subject: Re: [App_rpt-users] Node Status not showing...
>>>> > From: Jah Rastafari <nuhtrue at gmail.com>
>>>>
>>> > Date: Sun, January 11, 2015 9:20 pm
>>>> > To: mike at midnighteng.com,  "app_rpt-users at ohnosec.org"
>>>> > <app_rpt-users at ohnosec.org>
>>>> >
>>>> >
>>>> > I went back right after reading your reply (several hours after my
>>>> original
>>>> > post) and it in fact came up the way it should. But then 5 minutes
>>>> > later it went back to saying I wasn't connected. I'm not sure what it
>>>> means
>>>> > but I can say I've never seen it behave like this before.
>>>> >
>>>> > On Sun, Jan 11, 2015 at 4:56 PM, <mike at midnighteng.com> wrote:
>>>> >
>>>> > >
>>>> > >
>>>> > >
>>>> > > Not sure but....
>>>> > >
>>>> > > I think you are only suffering from a delay of the update to the
>>>> list.
>>>> > >
>>>> > > Try waiting for a short while (up to 30min) and look again.
>>>> > > Others have said it takes that long sometimes but I have only
>>>> witnessed
>>>> > > about 5-6min.
>>>> > >
>>>> > > Guess it depends on how busy the server is.
>>>> > >
>>>> > >
>>>> > > ...mike/kb8jnm
>>>> > >
>>>> > > > -------- Original Message --------
>>>> > > > Subject: [App_rpt-users] Node Status not showing...
>>>> > > > From: Jah Rastafari <nuhtrue at gmail.com>
>>>> > > > Date: Sun, January 11, 2015 5:29 pm
>>>> > > > To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
>>>> > > >
>>>> > > >
>>>> > > > Forgive me if this has already been discussed and I missed it,
>>>> but I just
>>>> > > > noticed recently that although I was connected to a number of
>>>> other
>>>> > > > nodes/repeaters, the 'Node Status' selection on the Allstar site
>>>> says I'm
>>>> > > > not connected to anything. My node(s) show up properly in the
>>>> available
>>>> > > > node list and everything else is as it should be. The Web
>>>> Transceiver
>>>> > > works
>>>> > > > properly also and I haven't changed anything recently. Am I
>>>> missing
>>>> > > > something?
>>>> > > >
>>>> > > > Bob/ KK6RQ<hr>_______________________________________________
>>>> > > > App_rpt-users mailing list
>>>> > > > App_rpt-users at ohnosec.org
>>>> > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> > > >
>>>> > > > To unsubscribe from this list please visit
>>>> > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>>> scroll down
>>>> > > to the bottom of the page. Enter your email address and press the
>>>> > > "Unsubscribe or edit options button"
>>>> > > > You do not need a password to unsubscribe, you can do it via email
>>>> > > confirmation. If you have trouble unsubscribing, please send a
>>>> message to
>>>> > > the list detailing the problem.
>>>> > >
>>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
>>> mailman/listinfo/app_rpt-users and scroll down to the bottom of the
>>> page. Enter your email address and press the "Unsubscribe or edit options
>>> button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150112/d174e23d/attachment.html>