[App_rpt-users] Get the same USB port assigned to a node at startup each time?

[Chuck Henderson]

see this page

https://allstarlink.org/usbradio.html



On Sun, Jan 18, 2015 at 3:18 PM, Cole Cunningham <colecaz at gmail.com> wrote:

> Doug,
>
>
>
> I have interfaced a radio to a FOB and am able to get all functions
> working except txaudio.
>
>
>
> When trying to adjust it using the radio tune command it gives be back
>
>
>
> Garage3*CLI> radio tune rxnoise 41189
>
> Device usb currently not active
>
> [
>
>
>
> The just the radio tune gives
>
>
>
> Garage3*CLI> radio tune
>
> Active radio interface is [usb]
>
> Device String is
>
> Card is -1
>
> Output A is currently set to composite.
>
> Output B is currently set to off.
>
> Tx Voice Level currently set to 500
>
> Tx Tone Level currently set to 200
>
> Rx Squelch currently set to 725
>
> Usage: radio tune <function>
>
>        rxnoise
>
>        rxvoice
>
>        rxtone
>
>        rxsquelch [newsetting]
>
>        txvoice [newsetting]
>
>        txtone [newsetting]
>
>        auxvoice [newsetting]
>
>        save (settings to tuning file)
>
>        load (tuning settings from EEPROM)
>
>
>
>        All [newsetting]'s are values 0-999
>
>
>
>
>
> The instructions on the docs.allstarling.org about adjusting radio
> parameters seem to refer only to the URI.
>
>
>
> Can you tell me the way to change the active device so that I can adjust
> and save the parameters and make the same usb port attach to the same node
> number every time?
>
>
>
> Thanks,
>
> Cole
>
> AA7RD
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150118/198d7220/attachment.html>