[App_rpt-users] compile on Debian

[Steve Zingman]

Bryan,
Do you get the crash when you start dahdi or when you modprobe pciradio?

Steve

On 1/27/2015 9:51 AM, app_rpt-users-request at ohnosec.org wrote:
> Message: 2
> Date: Tue, 27 Jan 2015 03:38:27 -0500
> From: Bryan Fields<Bryan at bryanfields.net>
> To:"app_rpt-users at ohnosec.org"  <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] compile on debian (was More than 4 nodes
> 	on a PC)
> Message-ID:<54C74E83.60203 at bryanfields.net>
> Content-Type: text/plain; charset=ISO-8859-1
>
> On 1/27/15, 1:04 AM, Doug Crompton wrote:
>> >Bryan,
>> >
>> >  Yes you will need Dahdi source. You need to remove Zaptel stuff. I would
>> >suggest getting it from the BBB image at hamvoip.org.  It already has the
>> >Allstar patches in it. It is located in
>> >/usr/src/utils/dahdi-linux-complete-2.9.1.1+2.9.1     If not you need to
>> >download that version of the code from Digium and apply the patches from the
>> >Allstar svn site.
> I've got Dahdi from Digium (dahdi-linux-complete-2.10.0.1+2.10.0.1) and
> applied the patches from ohnosec svn.  hunk 3 on patch 2 needed to be applied
> by hand, the rest went fine.
>
> Dahdi is compiled and installed.
>
> I have the ohnosec svn asterisk compiled as well.  Copied the sounds in place
> and started to configure asterisk.
>
> I've run into a bit of a problem while loading the pciradio module however.
> I don't know enough about kernel coding in linux to know where to begin
> debugging this.
>
> does your version of dahdi on the hamvoip.org site work ok?  perhaps it's new
> bug in the Digium code, and I should go with yours in place of it.
>

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic