[App_rpt-users] compile on Debian

[Bryan Fields]

Pciradio.  I am going to write a longer bug report once I pull it into gdb later today

On January 27, 2015 2:00:59 PM EST, Steve  Zingman <szingman at msgstor.com> wrote:
>Bryan,
>Do you get the crash when you start dahdi or when you modprobe
>pciradio?
>
>Steve
>
>On 1/27/2015 9:51 AM, app_rpt-users-request at ohnosec.org wrote:
>> Message: 2
>> Date: Tue, 27 Jan 2015 03:38:27 -0500
>> From: Bryan Fields<Bryan at bryanfields.net>
>> To:"app_rpt-users at ohnosec.org"  <app_rpt-users at ohnosec.org>
>> Subject: Re: [App_rpt-users] compile on debian (was More than 4 nodes
>> 	on a PC)
>> Message-ID:<54C74E83.60203 at bryanfields.net>
>> Content-Type: text/plain; charset=ISO-8859-1
>>
>> On 1/27/15, 1:04 AM, Doug Crompton wrote:
>>> >Bryan,
>>> >
>>> >  Yes you will need Dahdi source. You need to remove Zaptel stuff.
>I would
>>> >suggest getting it from the BBB image at hamvoip.org.  It already
>has the
>>> >Allstar patches in it. It is located in
>>> >/usr/src/utils/dahdi-linux-complete-2.9.1.1+2.9.1     If not you
>need to
>>> >download that version of the code from Digium and apply the patches
>from the
>>> >Allstar svn site.
>> I've got Dahdi from Digium (dahdi-linux-complete-2.10.0.1+2.10.0.1)
>and
>> applied the patches from ohnosec svn.  hunk 3 on patch 2 needed to be
>applied
>> by hand, the rest went fine.
>>
>> Dahdi is compiled and installed.
>>
>> I have the ohnosec svn asterisk compiled as well.  Copied the sounds
>in place
>> and started to configure asterisk.
>>
>> I've run into a bit of a problem while loading the pciradio module
>however.
>> I don't know enough about kernel coding in linux to know where to
>begin
>> debugging this.
>>
>> does your version of dahdi on the hamvoip.org site work ok?  perhaps
>it's new
>> bug in the Digium code, and I should go with yours in place of it.
>>
>
>-- 
>"Anything is possible if you don't know what you are talking about."
>1st Law of Logic
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>To unsubscribe from this list please visit
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>down to the bottom of the page. Enter your email address and press the
>"Unsubscribe or edit options button"
>You do not need a password to unsubscribe, you can do it via email
>confirmation. If you have trouble unsubscribing, please send a message
>to the list detailing the problem. 

--
Bryan Fields
727-409-1194
http://bryanfields.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150127/96950b8e/attachment.html>