[App_rpt-users] Removing the connection message

[Mike M]

Thanks Doug.  There are some snippets I've seen in say, extensions.conf
that you can see the announcement is pieced together.

exten=1998,1,answer()
exten=1998,n,Playback(rpt/node)
exten=1998,n,Playback(digits/1)
exten=1998,n,Playback(digits/6)
exten=1998,n,Playback(digits/2)
exten=1998,n,Playback(digits/0)
exten=1998,n,rpt(1998|P)

I assumed that there was someplace that something similar was defined for
the connections.

I don't have a /var/lib/asterisk/rpt folder, nevermind a nodenames
subfolder. so I'm guessing I have to create them.. I didn't see the folder
so I thought the BBB might be different.  I'll try it out.

Thanks to you both.




Regards,
Mike Montalvo, KF7MBK
ARA Membership Chair
www.w7ara.org






On Tue, Jul 14, 2015 at 8:22 AM, Doug Crompton <doug at crompton.com> wrote:

> Mike,
>
>  The BBB is no different than Acid in that regard. The connect messages
> are made up of Alison text put together to form a message on the fly. This
> is done in the code and not changeable without a source code mod and
> recompile.  If you go into the Asterisk client - asterisk -rvvv - and do a
> connect or disconnect you will see in the log how the individual snippets
> are put together to form the message.
>
> As was mentioned in an earlier message if you put a pre-recorded  audio
> file with the nodenumber that is connecting as the filename in the
> nodenames directory it will play that connect message instead. Since you
> are recording the message it can say anything you want. The RPi2 and 1.2.1
> BBB versions have goggle text to speech built-in and you could either use
> that or your own voice to create a message.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> From: kf7mbk at w7ara.net
> Date: Tue, 14 Jul 2015 07:21:10 -0700
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Removing the connection message
>
>
> I suppose I should say this is on a BBB with v1.  The connection message I
> am talking about is dynamic, it's not a recording, at least not the whole
> thing.
>
>
> Regards,
> Mike Montalvo, KF7MBK
> ARA Membership Chair
> www.w7ara.org
>
>
>
>
>
>
> On Tue, Jul 14, 2015 at 7:04 AM, Corey Dean <n3fe at repeater.net> wrote:
>
> It is the file name that exists under /var/lib/asterisk/rpt/nodenames.
> Just have a audio file created for your nose and it should play.
>
> Corey
>
> On Jul 14, 2015, at 9:50 AM, Mike M <kf7mbk at w7ara.net> wrote:
>
> Where is it that I can change what is played when creating a link between
> two (private) nodes?  I'm trying to change the 'Node xxx connected to node
> yyy. Trancieve" announcement but can't seem to find that anywhere.
>
> Thanks.
>
> Regards,
> Mike Montalvo, KF7MBK
> ARA Membership Chair
> www.w7ara.org
>
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
> from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button" You do not need a password to
> unsubscribe, you can do it via email confirmation. If you have trouble
> unsubscribing, please send a message to the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150714/9ed53eeb/attachment.html>