[App_rpt-users] Non-DSP operation

[Jeff Carrier]

I have one I can send you Lu.
On Jun 7, 2015 12:12 PM, "Lu Vencl" <luvencl8 at gmail.com> wrote:

> Can somebody send me an example USB file on how you should configure a no
> that is not running off solely the discriminator processing? I am running
> discriminator but I am trying to use CTCSS off my repeater. It is tied to
> pin number seven on the URI, however no matter if I use USB or USB invert I
> can't seem to get the signaling straightened out. My repeater sends out 12v
> when CTCSS is detected. I have cor set to no.
> Anyone have any ideas or can provide a sample for me please?
>
> Lu Vencl
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150607/c91d7c29/attachment.html>