[App_rpt-users] Configurations such as pl tones

[Geoff]

On 06/09/2015 01:30 AM, Loren Tedford wrote:
> Ok this is some thing i have been wanting to do such as configuring
> the URI i have to discriminate the pl tones for me however I am having
> a very hard time to get it to cooperate correctly.. I was finally able
> to get my repeater backup however its letting users with no tone
> transmit.... Confused greatly now I am Using a URI from DMK Engneering
> and I do have the Duplex cable for Motorola I am using CM200 radios
> and the radio channel is set to open squelch at moment for testing..
>
>
> here is a copy of my current config that works in usbradio.conf

See my notes in your config file.  I'm going to ass/u/me you're getting
your audio off of the discriminator, for flat-audio.  If you try to use
speaker audio, you can't use DSP.

> ;
> ; Usbradio channel driver Configuration File
> ;
>
> [general]
>
> [usb29925]
>
> hdwtype=0
> rxboost=1
> ;txboost=1
> rxctcssrelax=1
> txctcssdefault=141.3
> rxctcssfreqs=141.3
> txctcssfreqs=141.3
> ;rxctcssoverride=0
> carrierfrom=usbinvert
> ctcssfrom=no <--------------------  There's the problem. Should be
> *ctcssfrom=dsp*
> rxdemod=speaker <-------------- and here. Should be
> *rxdemod=flataudio* if using discriminator audio
> txprelim=yes
> txlimonly=yes
> txtoctype=notone
> txmixa=composite
> txmixb=no
> invertptt=0
> duplex=1
> rxondelay=0
> rxnoisefiltype=0
> eeprom=0

That's how it works on my 2m simplex node, using a Yaesu FT-8800 and the
packet port.


[usb29657]
hwtype=0
rxboost=1
txboost=2
rxctssrelax=1
txtcssdefault=141.3
rxctcssfreqs=141.3
txctcssfreqs=141.3
carrierfrom=usb
ctcssfrom=dsp
rxdemod=flat
txprelim=no
txlimonly=no
txtoctype=notone
txmixa=composite
txmixb=composite
invertptt=0
duplex=0
rxondelay=0
rxnoisefiltype=0
eeprom=0


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150609/af4997a5/attachment.html>