[App_rpt-users] signal level good enough for a URI-X?

[pete M]

what not a single answer... wow..

From: petem001 at hotmail.com
To: app_rpt-users at ohnosec.org
Date: Thu, 26 Mar 2015 12:54:46 -0400
Subject: [App_rpt-users] signal level good enough for a URI-X?




Anyone can confirm if a signal level of  70~90mVrms  with an Output impedance: 1kΩ or less
Coupling: AC coupling
Frequency response: ±2.5dB at
10~3000Hz is enough to drive a URI or should I use the included pre amp in the URI-X?
trying to use the RD line from a tkr-750 to do USBRadio control of a node. 
thanks
And while I am at it, 
pin 10 and 11 of the tkr both are signal input, 10 is TD (tx data) and 11 is TA (tx audio)  If I feed one side of the output to the pin 10 (TD) for tone signal and the other side to (TA) and apply repeated audio would that make sens?
Cause I did try that and It did not seem to work.. 
thanks again for your input
Pierre VE2PF

 		 	   		  

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150329/bc3e750c/attachment.html>